Specifications
- Total Height (A) = 43.5mm
- Body Width (B) = 40.1mm
- Below Mount (C) = 26.6mm
- Above Mount (D) = 15.6mm
- Total Length (E) = 54.4mm
- Total Width (F) = 20.2mm
- Spline diameter = 5.8mm (25T)
Note
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Servo Attributes
| Size | Standard |
| Gear Material | Metal |
| Servo Spline Count | 25Tooth |
| Waterproof Casing | No |
| Height (A) | 43.5mm |
| Body Length (B) | 40.01mm |
| Bottom to Under Mount (C) | 26.6mm |
| Top to Under Mount (D) | 15.6mm |
| Length (E) | 54.4mm |
| Width (F) | 20.2mm |
| 6V Torque kg/cm | 13 |
| 6V Sec/60 Degrees | 0.12 |
| Signal Type | Digital |