H1 LED Headlight Product description:

light Source Model:COB Chip,super bright

Power: 50W

Lumen:5500LM

Operating voltage:DC9-32V

Material: Aluminum PCB and PA66+30% GF Plastic

Beam Angle:360°

Color Temperature: 6000K Cool White

Lifespan:over 30000h

Working Temperature: -40-+80 Centigrade

Waterproof rate: IP68,IP68 rated water and dust seal,over 30000hrs lifetime

H11B LED Specifications:

Light source: H11B CSP 3570
Number of lights: 12 SMD
Power: 80w/set
Lumens: 4000LM
Color temperature: 6000K
Working voltage: 12V-24V DC
Light color: white light
IP Rate: IP67
Shell material: aluminum alloy
Light angle: 360 degrees
Working life: 50000H

LED headlight advantages:

1)LED lamps are more energy and power than conventional halogen lamps.

2)The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.

3)Instantly start without strong current impact, improve battery life by more than 30%.

4)Fast cooling , using the most advanced, heat-dissipating structural design.

5)The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.

6)Low heating temperature, The working temperature of helium can reach 800°-1000°

H8/H9/H11 Fog Light:
Plug Type:H8/H9/H11
LED Quantity(each bulb): 10pcs CSP chips
Luminous Flux: 8000LM/set (4000LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light,Daytime Running Light

Install Caution:

*As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

*Put the vehicle into park or make sure it is securely in gear.

*Be sure to turn off the ignition and remove the key.

*Be careful to avoid burns, especially when turning on or off the vehicles lighting.

*Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

*Fully examine the connection of the contact points, ports and the wires as faulty connections cancause lighting problems.

*Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package Included:
6pcs led bulbs

DataCaciques