ESP32C3 Version - external patch antenna included
[Deutsche Beschreibung unten/German description below]
The official DroneBridge for ESP32 board featuring the ESP32-C3. A simple plug&play solution for Wi-Fi telemetry for ArduPilot and PX4 based drones. The current release of DroneBridge for ESP32 is tested with the board.
Advantages over other ESP32 boards:
- Official test board for development ensuring high compatibility with all current and likely future releases
- Detailed documentation explicitly for the board described in the official wiki
- Smaller and lighter than comparable solutions
- Current version of DroneBridge for ESP32 pre-installed, configured and tested
- Secure and reliable connector using JST-GH according to the Pixhawk standard
- Connection for external antenna for more range
Weight: 8g (incl. cable and antenna)
Dimensions: 37.5 mm x 27 mm
Mounting holes: Diameter: 3.2mm - Distance: 30.5mm x 20mm
Scope of delivery:
1x DroneBridge for ESP32 HW v1.2 featuring ESP32C3
1x 15cm 6-pin JST-GH cable (Pixhawk telemetry cable)
1x 2.4GHz patch antenna
Information regarding international shipping (outside the european economic zone):
You, the buyer, are responsible for any VAT, tariff, duty, taxes,
handling fees, customs clearance charges, etc. required by your country
for importing goods. I do not collect this beforehand, and
cannot give you an estimate of the cost - charges vary around the world. The shippment is declared as best as possible. So far there were no issues.
All international orders are shipped using DHL economy.
From experience, shipping to US destinations takes around 14 days (door-to-door).
-------------------
German Version
Das offizielle DroneBridge for ESP32 Board. Die einfache
Plug&Play Lösung für Wi-Fi Telemetrie für ArduPilot und PX4 basierte
Drohnen. Das aktuelle Release von DroneBridge for ESP32 wurde mit dem
Board getestet.
Vorteile gegenüber anderen ESP32-Boards:
- Offizielles Test-Board der Entwicklung
- Ausführliche Dokumentation explizit für das hier beschriebene Board im offiziellen Wiki
- Kleiner und leichter als vergleichbare Lösungen
- Aktuelle Version von DroneBridge for ESP32 vorinstalliert, konfiguriert und getestet
- Sichere und zuverlässige Steckverbindung mittels JST-GH Steckern nach dem Pixhawk-Standart
- Anschluss für eine externe Antenne für mehr Reichweite
Gewicht: 8g (inkl. Kabel und Antenne)Maße: 37.5 mm x 27 mm
Befestigungsbohrungen: Durchmesser: 3.2mm – Abstand: 30.5mm x 20mm
Lieferumfang:
1x DroneBridge for ESP32 HW v1.1 mit dem ESP32C3
1x 15cm 6-pin JST-GH Kabel (Pixhawk Telemetrie Kabel)
1x 2.4GHz patch Antenne
Informationen zum internationalen Versand (nicht-EU):
Sie,
der Käufer, sind verantwortlich für Mehrwertsteuer, Zölle, Steuern,
Bearbeitungsgebühren, Zollabfertigungsgebühren usw., die in Ihrem Land
für die Einfuhr von Gütern anfallen.