•    SCHNEIDER Glass door, steel electrical enclosure

•    All connections are the quick release type from the main enclosure

•    Everything is earth properly and so is the main frame

•    LED Cabinet Lighting

•    LED Strip fitted to the X Axis

•    CSMIO/IP-M 4 Axis Motion Controller

•    4 x Gecko G201X Drive Stepper Motor Controllers 7a

•    4 x Sanyo Denki Stepper Motors, 24 V dc 6a 7.5mm Shaft (these have the quick release connections fitted)

•    Cables are all branded Lapp, Igus shielded and crimped

•    Water hoses are the correct FESTO Continuous bend type used

•    2.2KW Water cooled spindle with water cooling system

•    Air regulator, Air hose and WIKA Regulator display fitted

•    Air gun fitted

•    UJK T-Track plus 4 x clamps

•    X-,X+,Y-,Y+,Z+ A- Inductive Proximity Sensors LJ12A3-4-Z/AY Metal Detecting PNP NC Fitted and tested

•    Schneider estop fitted

•    Dual USB Port fitted at front connected to the PC

•    Windows desktop PC, Keyboard and mouse included with a high quality 27” widescreen monitor with 3m HDMI Cable

•    GENUINE MACH4 Installed onto the PC And is registered to the included PC

•    5x5cm fully welded base table with 22mm flooring fitted

•    Heavy duty feet and castors fitted

Id suggest the maximum cut height is 60mm but can be higher if using a smaller router bit

Z HEIGHT CUTTING:

Using the suplied backing board and MDF top with T-Track and a long shank etc i was able to cut the 60mm board in the images however you could moidfy to do 60-80mm depth but to keep it as its all set up the depth will be 60mm maximum

Parts alone have costed me around £5,000 please look at the specs and quality of the system its all high-end parts that were used so only looking to recoup my costs
If your thinking of building your own? The time it takes to build these, welding the full base frame, paint it, wire it all up and test it
it takes months and months of hard work!
Happy to upload videos onto YouTube before collecting
Fully tested and working 100%
Buying a CNC is the same as buying a car
You need to learn yourself how to operate it or already know, I’m unable to offer any assistance in how to use the included MACH4, gcode touch off etc