eBay

IMPORTANT:

The bypass module requires a Fortin Flashlink Updater in order to program it to work in your vehicle AND IS SOLD SEPARATELY!

PLEASE CHECK OUR EBAY STORE FOR OUR FORTIN BUNDLES THAT INCLUDE THE FLASHLINK!

The EVO-FORT2 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for 2013+ Ford vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.

EVO-ALL Features:

3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control port for TB-series modules

THAR-FORD2 Features:

EVO-ALL T-Harness for Ford vehicles
A T-Harness can now be used with the EVO-ALL to perform a full remote-starter and security installation
** These units required to be flashed/updated with a flashlink2 cable in order to set them up to use with your OEM key fob remote. Out of the box this unit will not funtion with your OEM remotes.

** T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.

** Check manufactorers web site to make sure your vehicle is comatible with this system