This receiver is ideal for contractors who operate mid-to-large size projects with machine control.
This receiver is also suitable for system integrators. It can accept site calibration data and user-defined geoid and then output site coordinates.
The receiver has the following features:
Integrated GNSS receiver and radio
The following options and upgrades are available for this receiver:
Location RTK
Location RTK with Precise Vertical
Precision RTK base
Precision RTK rover
Precision RTK base and rover
Moving Base/Heading
GLONASS
Galileo
BeiDou
Data logging (32 MB)
2 watt output for interval 450 UHF radio
1PPS (Construction version only); it is standard on the Marine version
Trimble xFill™ RTK service is available as a one-time purchase option for rover systems with the SPS855 modular receiver.
450 MHz (403 MHz to 473 MHz) or 900 MHz internal radio. The 450 UHF is a wideband 403 MHz to 473 MHz radio.
Supports the SNM941 cellular modem
Upgradeable receiver from Location GPS to Precision RTK modes. The modes are:
Location GPS precision at sub meter
Location RTK precision of 10 cm horizontal and 10 cm vertical
Location RTK precision of 10 cm horizontal and 2 cm vertical
Precision RTK mode for highest 3D accuracy. Optional Base only, Rover only, or Base/Rover modes.
440-channel L1/L2C/L5 GPS and QZSS plus L1/L2 GLONASS receiver, Galileo, BeiDou
Trimble CenterPoint® RTX and OmniSTAR XP/HP/VBS service capable
4-channel WAAS (Wide Area Augmentation System), EGNOS (European Geo-Stationary Navigation System), and MSAS Satellite Based Augmentation (SBAS) compatible
Long-life integrated battery, typically provides 9 hours operation as a base station or 12 hours operation as a rover with internal transmit/receive radio
Configuration and monitoring interface through the following methods:
Web interface
Networked or peer-to-peer Ethernet
Integrated display and keyboard
Trimble Siteworks™ or SCS900 Site Controller software
Choice of external GNSS antenna for base station or rover receiver operation. See GNSS antenna chart.
Small, lightweight design – 1.65 kg (3.64 lbs) receiver only, including the battery; 4 kg (8.82 lbs) complete system weight (rover including controller and rod)
Permanent/semi-permanent and mobile quick setup base station capability
Backpack, belt, rod, truck, and marine vessel mounting options for rover applications
Front panel display can be inverted for use on cabin wall mounting
Capable of all site measurement and stakeout operations within radio or cellular coverage
Easy-to-use menu system for rapid configuration and status checking
AutoBase technology for rapid and automated repeated daily base station setups
Can broadcast corrections through multiple radio links from one base station, for example, through an internal 450 MHz radio and an external 900 MHz radio or over the internet
Rugged, weatherproof construction with an IP67 environmental rating
–40 °C to +65 °C (–40 °F to +149 °F) operating temperature range
10.5 V to 28 V DC input power range, with over-voltage protection on a 26-pin connector
11.5 V to 28 V DC input power range with over-voltage protection on a Lemo connector to prevent deep discharge of external batteries
Capable of rover operation within a VRS network and Internet Base Station service
Moving baseline and heading capability when the SPS855 receiver is combined with any SPS85x or SPS55xH receiver (ensure that Moving Base/Heading mode is installed on each SPS855 receiver).
RoHS and WEEE compliant
1 pulse-per-second (1PPS) output - standard on Marine version, optional on Construction version
To receive GPS L5, GLONASS, Galileo, or BeiDou signals on the SPS855, you must purchase the optional upgrade.
Unrestricted operational range for rovers and grade control systems
Base station and rover operation in a single receiver depending on the options purchased
Integrated transmit radio or add-on SNM941 Connected Site Gateway
5 Hz, 10 Hz, or 20 Hz measurement update rate (10 Hz maximum in Heading mode)
Integrated receive radio or add-on SNM941 Connected Site Gateway
Base station-free rover capability within a VRS network or Internet Base Station Service (IBSS)
Base station-free rover capability using CenterPoint RTX/OmniSTAR services
Operates as an SBAS rover when coverage is available