IMPORTANT:

The bypass module requires a Fortin Flashlink Updater in order to program it to work in your vehicle AND IS SOLD SEPARATELY!

PLEASE CHECK OUR EBAY STORE FOR OUR FORTIN BUNDLES THAT INCLUDE THE FLASHLINK!

EVO-ALL Features:

• 3x on-board LEDs for simplified programming and diagnostics.
• 1x preloaded firmware for maximum compatibility.
• 4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
• 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
• Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly

Communication Ports

• 3x CAN-Bus controllers.
• 3x General purpose controllers (J1850, Class 2, encrypted key etc.).
• 2x On-board Relays (SPDT).
• 1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
• 1x TB control port for TB-series modules

THAR-CHR4 Features:

• EVO-ALL T-Harness for Chrysler, Dodge and Jeep vehicles
• T-Harness connectivity with the EVO-ALL on Chrysler Tip Start vehicles
• T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
• Some wires may still be required to be hard wired into your vehicle

** These units required to be flashed/updated with a flashlink2 cable in order to set them up to use with your OEM key fob remote. Out of the box this unit will not funtion with your OEM remotes.
**  T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
**  Check manufactorers web site to make sure your vehicle is comatible with this system