Features:1.Specification: Shank Diameter: 1/4"(6mm) ; Head Diameter: 20mm/0.78inch （The actual size measured by hand is a little smaller as shown in the figure.）2.Material：The grinding head is made from Aluminium Oxide, which has high hardness, toughness, and good stability.3.Compatibility: Compatibility: 1/4 inch round shank can fits electric rotary tools, drill, grinder and pneumatic power tool.4.Cylindrical shape: Suitable for surface and edge grinding, form grinding.5.Suitable for grinding of medium and high tensile strength metal materials.6.Widely used for rough grinding of ordinary steel, such as carbon steel with low hardness, general alloy steel, malleable cast iron, hard bronze, cutting tools, workpieces, etc. Notice：1.When instal...

GreatArtWorks

Enjoy Your Life!

10Pcs Grinding Stone 20mm Fit Drill Grinder Pneumatic Power Tool High Hardness

Features:
1.Specification: Shank Diameter: 1/4"(6mm) ; Head Diameter: 20mm/0.78inch （The actual size measured by hand is a little smaller as shown in the figure.）
2.Material：The grinding head is made from Aluminium Oxide, which has high hardness, toughness, and good stability.
3.Compatibility: Compatibility: 1/4 inch round shank can fits electric rotary tools, drill, grinder and pneumatic power tool.
4.Cylindrical shape: Suitable for surface and edge grinding, form grinding.
5.Suitable for grinding of medium and high tensile strength metal materials.
6.Widely used for rough grinding of ordinary steel, such as carbon steel with low hardness, general alloy steel, malleable cast iron, hard bronze, cutting tools, workpieces, etc.

 

Notice：
1.When installing the grinding head, ensure that the chuck can hold the 6mm shank with a special wrench, and check whether it is firm.
2.Please wear protective equipment correctly during operation, idle for 1-2 minutes for check after installation to ensure all is in order before use.
3.Too much force is easy to crack the grinding head or burn the machine motor. The grinding head should be kept at about 30 angles and the grinding equipment should be moved back and forth at a constant speed.

4.Due to high-temperature firing, the actual size is approximately 2 cm smaller than the stated size. Please check carefully before placing your order.

 

Package include:
10 x Cylindrical Grinding Stones(1/4"shank;16mm head)


Item Specifics
Brand Unbranded
MPN Does Not Apply
UPC Does Not Apply
Feature ESCP
Type Grinding Stone
Shank Diameter 1/4"(6mm)
Head Diameter 20mm/0.78inch
Fit electric rotary tools,drill,grinder pneumatic power tool
Package include 10 x Cylindrical Grinding Stones(1/4"shank;16mm head)
used for rough grinding of ordinary steel carbon steel with low hardness,
For general alloy steel,malleable cast iron, hard bronze
Country of Origin China

Payment
  • We accept PayPal only.
  • All major credit cards are accepted through secure payment processor PayPal.
  • Payment must be received within 7 business days of auction closing.
  • If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
Shipping
  • We Ship to Worldwide, but we do not ship to APO/FPO.
  • We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
  • Item will be sent out by Air mail within 24-48 hours after cleared payment (excluding weekend & holiday).
  • Arrival time (estimated):
  • Australia / Canada: 14-21 working days (18-29 days)
  • Germany / France / Spain / Eastern Europe: 18-25 working days (24-35 days)
  • Other countries: 25-35 working days (35-49 days)
  • Shipping time is only estimated and not guaranteed. If not get item after 60 days, please contact us for solving.
  • For bulk purchases weight over 2kg, we may offer EXPRESS way.
Satisfaction

  • 100% Satisfaction

  • If merchandise you found defective or damaged in the long transit, please contact us freely. We will solve your problem ASAP.

  • Defective items will be offered exchange, in condition that, it is returned within 7days upon receiving.

  • If other reason, you want to ship it back to us, you will be responsible for the returning shipping fee and we will send the replacement after receiving the returned item.

  • We will leave SAME FEEDBACK after you do it for us. Please contact us if you are not satisfied with the item after receiving it.

  • All buyers are responsible for Customs duties/VAT (value added tax) in their own respective country, if there is any.

 

Contact Us

  • All emails will be answered within 1-2 business day. If you do not receive our reply, please kindly re-send your email/message and we will reply you as soon as possible.

  • Our Customers are our priority and our lifeline ,and this is reflected in the way we ensure you are satisfied with your purchase.

Special Offers!
content_src_url
Ending Soon!
content_src_url
Hot Item
New List Item
Store Category
 Store Home
 Sporting Goods
 Business & Industrial
 Home & Garden
 Cell Phone & PDA Accessories
 Car Parts&Accessories
 MP3 Accessories
 Jewelry & Watches
 Smoking Pipe
 EDC Tool
 Ebay Motors
 Consumer Electronics
 Games & Hobbies
 Sewing Accessories
 Leather Tools
 Magic Tricks
 Beauty & Health
 Tattoo Supplies
 DIY Crafts
 Collectibles
 D-Others
 Art Supplies
 Music Instruments & Gear
 Wood Carving Tools
 Phone & Watch Repair Tools
 Boat Parts & Accessories
 Body Health
 Electronic Technology
 Other
10Pcs Grinding Stone 20mm Fit Drill Grinder Pneumatic Power Tool High Hardness

Features:
1.Specification: Shank Diameter: 1/4"(6mm) ; Head Diameter: 20mm/0.78inch （The actual size measured by hand is a little smaller as shown in the figure.）
2.Material：The grinding head is made from Aluminium Oxide, which has high hardness, toughness, and good stability.
3.Compatibility: Compatibility: 1/4 inch round shank can fits electric rotary tools, drill, grinder and pneumatic power tool.
4.Cylindrical shape: Suitable for surface and edge grinding, form grinding.
5.Suitable for grinding of medium and high tensile strength metal materials.
6.Widely used for rough grinding of ordinary steel, such as carbon steel with low hardness, general alloy steel, malleable cast iron, hard bronze, cutting tools, workpieces, etc.

 

Notice：
1.When installing the grinding head, ensure that the chuck can hold the 6mm shank with a special wrench, and check whether it is firm.
2.Please wear protective equipment correctly during operation, idle for 1-2 minutes for check after installation to ensure all is in order before use.
3.Too much force is easy to crack the grinding head or burn the machine motor. The grinding head should be kept at about 30 angles and the grinding equipment should be moved back and forth at a constant speed.

4.Due to high-temperature firing, the actual size is approximately 2 cm smaller than the stated size. Please check carefully before placing your order.

 

Package include:
10 x Cylindrical Grinding Stones(1/4"shank;16mm head)

Item Specifics
Brand Unbranded
MPN Does Not Apply
UPC Does Not Apply
Feature ESCP
Type Grinding Stone
Shank Diameter 1/4"(6mm)
Head Diameter 20mm/0.78inch
Fit electric rotary tools,drill,grinder pneumatic power tool
Package include 10 x Cylindrical Grinding Stones(1/4"shank;16mm head)
used for rough grinding of ordinary steel carbon steel with low hardness,
For general alloy steel,malleable cast iron, hard bronze
Country of Origin China


  • We accept PayPal only.
  • All major credit cards are accepted through secure payment processor PayPal.
  • Payment must be received within 7 business days of auction closing.
  • If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
  • We Ship to Worldwide, but we do not ship to APO/FPO.
  • We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
  • Item will be sent out by Air mail within 24-48 hours after cleared payment (excluding weekend & holiday).
  • Arrival time (estimated):
  • Australia / Canada: 14-21 working days (18-29 days)
  • Germany / France / Spain / Eastern Europe: 18-25 working days (24-35 days)
  • Other countries: 25-35 working days (35-49 days)
  • Shipping time is only estimated and not guaranteed. If not get item after 60 days, please contact us for solving.
  • For bulk purchases weight over 2kg, we may offer EXPRESS way.

  • 100% Satisfaction

  • If merchandise you found defective or damaged in the long transit, please contact us freely. We will solve your problem ASAP.

  • Defective items will be offered exchange, in condition that, it is returned within 7days upon receiving.

  • If other reason, you want to ship it back to us, you will be responsible for the returning shipping fee and we will send the replacement after receiving the returned item.

  • We will leave SAME FEEDBACK after you do it for us. Please contact us if you are not satisfied with the item after receiving it.

  • All buyers are responsible for Customs duties/VAT (value added tax) in their own respective country, if there is any.

 

  • All emails will be answered within 1-2 business day. If you do not receive our reply, please kindly re-send your email/message and we will reply you as soon as possible.

  • Our Customers are our priority and our lifeline ,and this is reflected in the way we ensure you are satisfied with your purchase.


Copyright of Greatartworks. All rights reserved.

On 20/05/2026 at 00:37:40 AEST, seller added the following information:

Datacaciques