JL Audio Evolution C2-650 For a car speaker to excel it must be thoroughly engineered in all areas. The C2-650 woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.

In designing the new C2-650 Coaxial and Component Systems, JL Audio have drawn from their vast experience in woofer design as well as the tweeter technologies employed in their world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.

All JL Audio models include removeable front-loading protective grilles with a striking new design that combines black steel mesh with satin silver accents. Electroformed logo nameplates can be positioned on the grilles or elsewhere in the vehicle, according to the needs of the installation.

System

• 6.5" / 165 mm 2-Way Component set
• Includes Grilles
• Continuous Power Handling: 60 Watts
• Rec. Power Range (per channel): 15 - 100 Watts
• System Efficiency: 91 dB @ 1W/1m
• System Nominal Impedance: 4 ohm
• System Frequency Response: 59 Hz - 22 KHz ± 3 dB

Woofers

• Injection-molded, Mica-filled, Polypropylene Cone, Butyl Rubber Surround
• 1 in. Voice Coil on Kapton® Former
• Flat, Symmetrical Roll Spider
• Ferrite Magnet
• Frame Outer Diameter* (A) 6.5 in / 165 mm
• Grille Tray Outer Diameter (B) 6.84 in / 174 mm
• Magnet Outer Diameter (C) 3.15 in / 80 mm
• Frontal Coaxial Tweeter Protrusion (D) N/A
• Frontal Grille Protrusion** (E) 0.85 in / 22 mm
• Mounting Hole Diameter (F) 5.56 in / 141 mm
• Mounting Depth (G) 2.44 in / 62 mm *Does not take into account mounting tabs

  **Frontal grille protrusion measured from mounting surface

  Tweeters

• 0.75 in. (19 mm) Silk Dome
• Ferrofluid Cooling / Damping
• Neodymium Magnet
• Flush Mount Fixture Diameter (A1) 1.87 in / 48 mm
• Surface Mount Fixture Diameter (A2) 1.69 in / 43 mm
• Flush Mount Mounting Hole Diameter (B) 1.625 in / 41 mm
• Flush Mount Mounting Depth (C) 0.76 in / 19 mm
• Flush Mount Tweeter Frontal Protrusion (D1) 0.29 in / 7 mm
• Surface Mount Tweeter Frontal Protrusion (D2) 0.92 in / 23 mm

  Crossovers

• 1st Order Low_pass Filter
• 2nd Order High-Pass Filter
• 3 Position Adjustable Tweeter Level
• Premium Mylar Capacitors
• Premium Air-Core Inductors