![]() ![]() This smart charger is widely used on all Club Car golf carts manufactured from 1995 to the present, including DS, Precedent, Tempo, Villager, etc. NOTE: Club Car DS 1995-2010 and Club Car Precedent 2004-2014 require an OBC bypass wire. ![]() ![]() BUILT-IN SAFETY FEATURES ▶️Over temperature protection: If the charger exceeds normal operating temperatures, power output will be decreased until regular operating temperatures resume. If the charger exceeds 149° F, the charger will automatically stop charging and go into standby mode until normal operating temperatures are detected and charging can safely be resumed. ▶️ Reverse polarity protection:If one or more batteries are connected improperly, the charger will automati cally shut down to prevent any potential damage to the batteries. ▶️ No load protection:When the charger DC paddle is disconnected, the charger will provide zero output to the DC output connection. ▶️ Short circuit protection:If a short-circuit is detected, the charger will automatically shut down. Once the short circuit is rectified, the charger will resume its normal charging status. ▶️ Auto shut down:When the batteries reach the fully charged state the charger will automatically shut down and provide zero DC output and a solid green light. ![]() ![]() Notice: 1. To ensure all the dissipate heat vent not to be blocked to avoid influencing the normal working because of higher temperature. 2. Charger installation position should take water proof into consideration to avoid the liquid penetrating inside of charger gradually to influence the normal working. 3. To ensure the direct current voltage and current is consistent with the allowed input voltage and current, any query. 4. In view of safety and electromagnetic compatibility, the charger equipped with three plug and suitable for the grounding socket. 5. If you need extension line, to ensure the extension line can bear charger maximum input current and make the length of extension line be in a certain limit. 6. If the battery is found to be abnormal or damaged during working process, please drop the power adapter and connector immediately, then let us know. 7. Not allowing disassembling the charger, open the cover of charger casually may result in electric shock hazard or other damages. 8. If there is damage of wiring harness, please change immediately. ![]() |

