DRAGON 1/35 6496 T19 105mm Howitzer Aluminum Gun Barrel//3D Printed Headlight Guard & Horn Guard
- Aluminum parts make the barrel even stronger
[About the actual car]
- The M3 Half-track was one of the half-tracks developed by the US Army during World War II.
- It was officially adopted in 1940, and approximately 12,500 were produced from 1941 onwards.
- The M3 Half-track was one of the half-tracks developed by the US Army during World War II.
- It was officially adopted in 1940, and approximately 12,500 were produced from 1941 onwards.
- In addition, various variations were produced, taking advantage of the mobility of the half-track and the capacity of the troop compartment.
- Among these, the T19 105mm self-propelled howitzer was developed by modifying the troop compartment and mounting a 105mm howitzer.
- Development began in 1941, and approval for use in combat was granted in 1942.
- Production immediately began at Diamond T Motorcar Company, but due to the fact that production of the M7 Priest, which was equipped with the same 105mm M2A1 howitzer, had already begun, only 324 T19s were produced.
- Adopted in 1941, it was used throughout World War II and afterwards in the Korean War and Vietnam War.
- Among these, the T19 105mm self-propelled howitzer was developed by modifying the troop compartment and mounting a 105mm howitzer.
- Development began in 1941, and approval for use in combat was granted in 1942.
- Production immediately began at Diamond T Motorcar Company, but due to the fact that production of the M7 Priest, which was equipped with the same 105mm M2A1 howitzer, had already begun, only 324 T19s were produced.
- Adopted in 1941, it was used throughout World War II and afterwards in the Korean War and Vietnam War.
[About the model]
- The model is a plastic model assembly kit that reproduces the US Army's T19 105mm self-propelled howitzer.
- The model is 1/35 scale and is fully detailed, with the ladder frame reproduced as a single unit, as well as the engine, transmission, front and rear axles, and other drivetrain components.
- In addition, this set includes aluminum parts for the barrel, and 3D printed parts for the light guard and horn guard to create a realistic finish.
- The compartment at the rear of the vehicle, where the 105mm howitzer is mounted, accurately reproduces the details of the T19, even down to the texture of the floor.
- The 105mm M2A1 howitzer that is mounted on it is reproduced in great detail, from the detailed mechanisms to the gun carriage and gun shield, giving it a satisfying finish.
- The driver's seat is also reproduced in detail, including the instrument panel.
- In addition, the set also includes etched parts such as front grille armor plates and rear mud flaps.
- This is a kit that you can take your time with.
- The front tire reproduces the natural state of deformation caused by its own weight, enhancing the sense of realism of the finish.
- The model is a plastic model assembly kit that reproduces the US Army's T19 105mm self-propelled howitzer.
- The model is 1/35 scale and is fully detailed, with the ladder frame reproduced as a single unit, as well as the engine, transmission, front and rear axles, and other drivetrain components.
- In addition, this set includes aluminum parts for the barrel, and 3D printed parts for the light guard and horn guard to create a realistic finish.
- The compartment at the rear of the vehicle, where the 105mm howitzer is mounted, accurately reproduces the details of the T19, even down to the texture of the floor.
- The 105mm M2A1 howitzer that is mounted on it is reproduced in great detail, from the detailed mechanisms to the gun carriage and gun shield, giving it a satisfying finish.
- The driver's seat is also reproduced in detail, including the instrument panel.
- In addition, the set also includes etched parts such as front grille armor plates and rear mud flaps.
- This is a kit that you can take your time with.
- The front tire reproduces the natural state of deformation caused by its own weight, enhancing the sense of realism of the finish.
[Main features]
- The barrel is made of aluminum and the rifling is also reproduced.
- Headlight guard and horn guard are 3D printed parts with precise modeling of their shapes
- 1/35 scale reproduction of the US World War II self-propelled howitzer T19
- Chassis is fully detailed with engine, suspension, etc.
- 105mm howitzer mechanism is modeled in detail
- The front tires are also deformed by their own weight.
- The barrel is made of aluminum and the rifling is also reproduced.
- Headlight guard and horn guard are 3D printed parts with precise modeling of their shapes
- 1/35 scale reproduction of the US World War II self-propelled howitzer T19
- Chassis is fully detailed with engine, suspension, etc.
- 105mm howitzer mechanism is modeled in detail
- The front tires are also deformed by their own weight.
warnin
g
Due to the product is a professional assembled model that requires glue and painting after co
mpletio
n,
However,
paint and glue is flammable and explosive, please store it in a safe place
DRAGON 1/35 6496 T19 105mm Howitzer Aluminum Gun Barrel//3D Printed Headlight Guard & Horn Guard
- Aluminum parts make the barrel even stronger
[About the actual car]
- The M3 Half-track was one of the half-tracks developed by the US Army during World War II.
- It was officially adopted in 1940, and approximately 12,500 were produced from 1941 onwards.
- The M3 Half-track was one of the half-tracks developed by the US Army during World War II.
- It was officially adopted in 1940, and approximately 12,500 were produced from 1941 onwards.
- In addition, various variations were produced, taking advantage of the mobility of the half-track and the capacity of the troop compartment.
- Among these, the T19 105mm self-propelled howitzer was developed by modifying the troop compartment and mounting a 105mm howitzer.
- Development began in 1941, and approval for use in combat was granted in 1942.
- Production immediately began at Diamond T Motorcar Company, but due to the fact that production of the M7 Priest, which was equipped with the same 105mm M2A1 howitzer, had already begun, only 324 T19s were produced.
- Adopted in 1941, it was used throughout World War II and afterwards in the Korean War and Vietnam War.
- Among these, the T19 105mm self-propelled howitzer was developed by modifying the troop compartment and mounting a 105mm howitzer.
- Development began in 1941, and approval for use in combat was granted in 1942.
- Production immediately began at Diamond T Motorcar Company, but due to the fact that production of the M7 Priest, which was equipped with the same 105mm M2A1 howitzer, had already begun, only 324 T19s were produced.
- Adopted in 1941, it was used throughout World War II and afterwards in the Korean War and Vietnam War.
[About the model]
- The model is a plastic model assembly kit that reproduces the US Army's T19 105mm self-propelled howitzer.
- The model is 1/35 scale and is fully detailed, with the ladder frame reproduced as a single unit, as well as the engine, transmission, front and rear axles, and other drivetrain components.
- In addition, this set includes aluminum parts for the barrel, and 3D printed parts for the light guard and horn guard to create a realistic finish.
- The compartment at the rear of the vehicle, where the 105mm howitzer is mounted, accurately reproduces the details of the T19, even down to the texture of the floor.
- The 105mm M2A1 howitzer that is mounted on it is reproduced in great detail, from the detailed mechanisms to the gun carriage and gun shield, giving it a satisfying finish.
- The driver's seat is also reproduced in detail, including the instrument panel.
- In addition, the set also includes etched parts such as front grille armor plates and rear mud flaps.
- This is a kit that you can take your time with.
- The front tire reproduces the natural state of deformation caused by its own weight, enhancing the sense of realism of the finish.
- The model is a plastic model assembly kit that reproduces the US Army's T19 105mm self-propelled howitzer.
- The model is 1/35 scale and is fully detailed, with the ladder frame reproduced as a single unit, as well as the engine, transmission, front and rear axles, and other drivetrain components.
- In addition, this set includes aluminum parts for the barrel, and 3D printed parts for the light guard and horn guard to create a realistic finish.
- The compartment at the rear of the vehicle, where the 105mm howitzer is mounted, accurately reproduces the details of the T19, even down to the texture of the floor.
- The 105mm M2A1 howitzer that is mounted on it is reproduced in great detail, from the detailed mechanisms to the gun carriage and gun shield, giving it a satisfying finish.
- The driver's seat is also reproduced in detail, including the instrument panel.
- In addition, the set also includes etched parts such as front grille armor plates and rear mud flaps.
- This is a kit that you can take your time with.
- The front tire reproduces the natural state of deformation caused by its own weight, enhancing the sense of realism of the finish.
[Main features]
- The barrel is made of aluminum and the rifling is also reproduced.
- Headlight guard and horn guard are 3D printed parts with precise modeling of their shapes
- 1/35 scale reproduction of the US World War II self-propelled howitzer T19
- Chassis is fully detailed with engine, suspension, etc.
- 105mm howitzer mechanism is modeled in detail
- The front tires are also deformed by their own weight.
- The barrel is made of aluminum and the rifling is also reproduced.
- Headlight guard and horn guard are 3D printed parts with precise modeling of their shapes
- 1/35 scale reproduction of the US World War II self-propelled howitzer T19
- Chassis is fully detailed with engine, suspension, etc.
- 105mm howitzer mechanism is modeled in detail
- The front tires are also deformed by their own weight.
On 19-Dec-2025 at 10:16:12 GMT, seller added the following information: