Don't support all key lost for Toyota,For Renault
[2025 Professional Key Fob Programming Tool]: Autel MaxiIM IM508S is a fast and convenient key programmer, also known as an alternative to IM608, IM608Pro. Pairing with the XP200 device, IM508S automotive scanner maximizes its powerful capacity in IMMO functions, key programming, all-system diagnostics, and 40+ service. Providing all-around protection for immobilizers and one-stop solutions for technicians and DIYers.
[Autel IM508S Advanced IMMO & Key Programming]: Featuring a simple process and easy-to-use design, Autel IM508S key fob programmer combines programming for key & chips (MCU/EEPROM) and IMMO related functions including IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, PIN/CS Reading, Key Generation, Key Learning, Remote Learning, etc., which stops you worrying too much about accidental key loss and illegal car start.
[Intelligent IMMO Modes]: Autel IM508S 2 pioneering modes for facilitating different users make the IM508S key programmer immobilizer easy to use. ✔️1) Smart Mode for guided and automated key learning (for DIYers & beginners); ✔️2) Expert Mode for advanced key learning (for skilled technicians). Based on Cortex-A9 Processor & Android 11.0 OS and 64GB Memory, the Autel car key programmer improves 2x faster process in multi-tasks.
[40+ Common Functions]: Perfect combination of key programming and vehicle diagnostics, the key fob programmer also holds 40+ repair functions covering reset/ matching/ adaption/ of vehicle ECUs. Oil/EPB/TPMS/DPF/SAS/BMS Reset, ABS Bleeding, Injector Coding, TEC Learning, Trans Adaption included. All-in-1 key programmer immobilizer even saves much time and brings more business.
[3000+ Active Tests = IM608 PRO II]Pay half, yet get all 3000+ tests with Autel IM508S. You can send information to ECU, commanding components such as relays, injectors, coils, solenoids valves, actuators to move. Say goodbye to time-consuming old methods like visual inspections and listening for unusual sounds, this bi-directional scan tool IM508S enables you to verify if they function correctly in just minutes, greatly speeding up troubleshooting process 5X FASTER![OE-Level All System Scan, AutoVIN, Cloud Report, MV105S/108S] Same as IM608 PRO2 IM608S IM508S PRO MS908S PRO II, Autel IM508S can scan all systems, examining every aspect of CEM/ECM/TCM/ABS/BCM/DIM/ASDM/BBS/IMS etc. with smart AutoVIN/Scan to quickly identify VIN codes, boosting efficiency. Plus, Cloud Report can save diagnostic reports in cloud server for your easy access whenever need them. For in-depth inspection in engine/undercarriage/electrical/interior, attach “optional” Endoscope MV105S/108S.
[FCA SGW (AutoAuth) & 15000+ Models]Autel Scanner IM508S stands at forefront of scan tools, boasting: 1) comprehensive coverage for 15,000+ models across 150+ global brands; 2) access to FCA SGW cars and support CAN-FD. This meets repair needs of extensive compatibility, precise fault detection and higher data transmission. Also as a universal Autel scanner, Autel IM508S is NO-IP limited and supports 21+ languages. You’ll find a joy to use it regardless of location.
[All System Diagnostics for Worldwide Vehicles]: Autel IM508S can perform OE-level diagnostics for all available systems of 80+ models (1996-2024) from American, Asian, and European regions. It quickly reads vehicle information and troubleshoots all the DTCs efficiently. No-IP limitation and multi-language settings allow you to take this diagnostic scanner for a business trip.
[No-Risk Purchase]: Autel MaxiIM IM508S car key programmer for all vehicles ✔️12-Month free updating, ✔️1 Year Free Update✔️30-day return policy, and ✔️24*7 post-sale response, to clear your trouble on online shopping.
Newly Added Features on Autel IM508S
* For Fiat:
1. Adds Key Learning (Bypass PIN)Function for Argo (2017-2020), Cronos (2017-2020),Toro (2016-2020),Mobi (2016-2019) and New Fiorino (2008-2019)[Globallnitial Launch]
2. Adds Key Learning for Blade Key Function for Awventura (2014-2018). [GlobalInitial Launch]
3. Adds Key Learning for Blade Key Function for 500x (2018-2020), Eaea (2018-2020) and Tipo(2018-2020)
* For BMW:
1. Supports New Software Version (swfl_00002419_085_010_080) for KeyLearning Function for FEM/BDC Immobilizer System.[Global Initial Launch]
2. Adds 196 Software Versions,Supporting Read ISN (OBD Mode) Function forB48/B58 Engine.[Global Initial Launch]
Supported Automotive Protocols
ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
EEPROM Read/Write Supported Types
ATMEL
For AT24C01, AT24C02, AT24C04, AT24C08, AT24C16, AT24C32, AT24C64, AT24C128, AT24C256, AT24C512, AT24C1024, AT24C128_1.8 AT24C256_1.8, AT24C512_1.8, AT24C01A, AT25010, AT25020, AT25040, AT25080, AT25160, AT25320, AT25640, AT25128, AT25256 AT25512, AT25010_1.8, AT25020_1.8, AT25080_1.8, AT25320_1.8, AT25640_1.8, AT25128_1.8, AT25256_1.8, AT59C11, AT59C22 AT93C46A, AT59C13, AT93C46, AT93C46R, AT93C56, AT93C57, AT93C66, AT93C76, AT93C86
For CATALYST
CAT25C01, CAT25C02, CAT25C04, CAT25C08, CAT25C16, CAT25C32, CAT25C64, CAT25C128, CAT25C256
For FAIRCHILD
NM24C16U, NM24C16UT, NM24C17U, NM24C17UT, FM93CS46T
For MICROCHIP
85C72, 85C82, 85C92, 25xx080, 25xx160, 25xx320, 25xx640, 25xx040_TSSOP, 25xx320_TSSOP, 25xx640_TSSOP, 93C06, 25xx040 93C46X, 93C46A, 93C46, 93C46AX, 93C46BX_93C46CX, 93C56A, 93C56, 93C66A, 93C66, 93C76A, 93C76, 93C86A, 93C86
For NXP
PCF8582C, PCF8594C, PCF8598C
For NATIONAL
NM93C13, NM93C14, NM93CS06, NM93C14TM8, NM93CS46, NM93CS56, NM93CS66
For OKI
MSM16911
For SONY
CXK1011, CXK1012, CXK1013
For Seiko
S_24S45, S_24H30, S_24H30_SOP8, S_24H45, S_24H45_SOP8, S_24S30
For ST
M24C01, M24C02, M24C04, M24C08, M24C16, M24C32, M24C64, ST24x01/ ST25x01, ST24x02/ST25x02, ST24x04/ST25x04, ST24x08/ST25x08, ST24x16, ST25x16, AT25040_1.8, AT25160_1.8, M95010, M95020, M95160, M95040, M95080, M35080, M95320, M95640, M95256, M95128, M95512, M93C46, M93C56, M93C66, M93C76, M93C86, M93S46, M93S56, M93S66
TOSHIBA
TC89101, TC89102, TC89121, TC89122
For TMC
TMC93LC46, TMC93LC56, TMC93LC57, TMC93LC66, TMC93LC86
For XICOR
X5043, X5045, X25043, X25045, X24C44
For 9S12 Read/Write Supported Types
FREESCALE
MC9S12DG128
Product Specifications:
| Operating System | Android 11 |
| Processor | Rockchip RK3566 Quad core Processor:4x 1.8GHz(A55) |
| Memory | 64GB |
| Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
| Connectivity | Mini USB 2.0 USB2.0 Wi-Fi Micro SD card slot(supports up to 64GB) |
| Sensors | Ambient light sensor for brightness auto changing |
| Power and Battery | 3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply |
| Tested Battery Life | Around 4.5 hours of continuous use |
| Battery Charging Input | 5V/1.5A |
| Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on)@3.7 V |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -20 to 60°C (-4 to 140°F) |
| Operating Humidity | 5%-95% non-condensing |
| Net Weight | 885g(2.31|b.) |
| Supported Automotive Protocols | ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
Package Includes:
1PC x MaxiIM IM508S Tablet
1PC x XP200 Key Programmer
1PC x Main Cable
1PC x Mini USB Cable
1PC x USB External Power Adapter
1PC x APB001 (EEPROM Adapter)
1PC x APB002 (68HC908 Adapter)
1PC x APA002 (EEPROM Socket)
1PC x APA001 (EEPROM Clamp Intergrated MC9S12 Cable)
1PC x AAC001 – MED17 Cable
1PC x KIA-10 Adaptor
1PC x KIA-20 Adaptor
1PC x Mazda-17 Adaptor
1PC x Honda-3 Adaptor
1PC x Carrying Case
1PC x Quick reference guide