Headshell To Cartridge Solder To Fit 24k Gold Plated Connector Pins For All Makes Of Turntables Tonearms.

They will Fit All Tonearms & Headshells from All Turntable Manufacturers.

We have had these Made to a Very High Standard, the Quality & Finish is Superb.

They are Made of Phosphor Bronze & then Gold Plated With 24K Gold.

Pin Size is 1.2mm, they can be Used with 1.3mm Cartridge Pins by Using a Little Bit of Force on them when Push Fitting them.

The Length of the Connector is about 10mm.

Fitting Information:

Carefully Prepare the Ends of the Leads that they are going to be Soldered to.

Taking Great Care not to Burn Yourself (Ideally Use Some Thin Nose Pliers of Similar) to Hold the Connector Still, Place a Small Piece of Solder on the End of the Connector, then Join it with the Connecting Lead.

Repeat on all Four Connectors, Fit your Cartridge & Push the Connector Pins in Place on the Cartridge.

Tools Required:

A Soldering Iron, Solder, Thin Nosed Pliers & a Pair of Cable Strippers.

Please see Our Other Listing, we have these as a Complete Kit Including all Required Tools at the Price of £24.99