SCSIknife desktop - solid state SCSI hard disk drive emulator based on the ZuluSCSI™ pico firmware

SCSIknife is a compact and versatile solid state replacement solution for SCSI disk drives. SCSIknife emulates hard disk drives, CD-ROM drives, removal media, magneto-optical and tape drives from disk images files. SCSIknife is easy to set up and use, by simply placing disk image files on a SD or MicroSD card. SCSIknife can also be used in host/initiator mode, where it will automatically copy the content of an SCSI drive straight to the SD card without computer intervention.

SCSIknife runs the popular open-source ZuluSCSI™ pico firmware and is simple to use and configure.

SCSIknife is available in four different configurations:

• SCSIknife desktop, with an HE-10 50-pin connector.

• SCSIknife mobile, with a 2.5" hard drive connector.

• SCSIknife multi, with all connectors fitted.

An optional SD card extender is also available with a 50 cm (20") ribbon cable, allowing to relocate the SD card slot away from the SCSIknife board.

Specifications:

  • SCSI-1 (5 MB/s) and SCSI-2 (10 MB/s), actual 9.5 MB/s read and 6.0 MB/s write
  • SD or MicroSD card with quality spring-loaded push/push connectors
  • FAT32 and exFAT support for SD card format
  • USB-C connector
  • Emulate up to seven separate devices on the same SCSI bus
  • Act as both SCSI device and SCSI host
  • Powered from SCSI termination, from 4-pin Berg connector, or USB-C
  • Fully compatible with the open source ZuluSCSI™ Pico firmware
  • Same compact footprint as a 2.5" hard disk drive
Compatibility (may also work with systems not listed here):

  • Apple IIgs (High speed SCSI controller card)
  • Apple Lisa (Sun Remarketing SCSI card)
  • Apple 68k Macintosh, Macintosh Portable and PowerBook (All)
  • Apple PowerPC Macintosh and PowerBook (All)
  • Applix 1616
  • AT&T 3B2
  • Atari Falcon
  • Atari Mega ST 1 (ICD host adapter)
  • Atari Mega STE
  • Atari Stacy
  • Atari TT030
  • BBC Micro/Master (Akhter host adapter)
  • Commodore Amiga 1200 (Typhoon accelerator card)
  • Commodore Amiga 2000 (DKB RapidFire SCSI card)
  • Commodore Amiga 3000
  • Commodore Amiga 4000 (CyberStorm PPC)
  • Commodore Amiga 500+ (GVP A530 card, Oktagon 508 SCSI card)
  • Data General MV/2500DC*
  • DEC AlphaStation
  • DEC MicroVAX
  • DEC PDP-11/73
  • HP 9000/715
  • HP Apollo 400/425
  • HP PA-RISC (All)
  • IBM RS/6000
  • IMS MM/1
  • Motorola System V/68
  • Motorola System V/88
  • NeXTcube (All)
  • NeXTstation (All)
  • RM Nimbus
  • Sharp X68000 (SASI & SCSI)*
  • Silicon Graphics (All)
  • Solbourne S3000
  • Sun Microsystems 68k workstations (All)
  • Sun Microsystems SparcStation (All)
  • Sun Microsystems UltraSparc (All)
  • Symbolics Lisp Machine XL1200*
  • TI-99/4A
  • Akai S1000, S1100*, S2000, S3200*, S3000XL, S5000, S6000, MPC2000XL, DPS 12, DR4, DR4VR
  • Casio FZ-20M
  • EMU Emulator E4X, E6400, Emax1, Emax2, EIIIXP, EIIIXS, Darwin, ESI2000, ESI4000, ESI32, Emulator EIVK
  • Ensoniq ASR-X, ASR-10, EPS16+
  • Fairlight Series III
  • Korg Triton Studio
  • Kurzweil K2000R, K2500XS, K2600
  • Peavey SP
  • Roland JS-30, W-30, VS2480, S-550, S-750, S-760, S-770, XV-5080, G1000
  • Sequential Circuits Studio 440
  • Synclavier 9600
  • Waveframe 1000
  • Yamaha A5000, A3000, EX5, EX5R, RS7000
  • HP 16601A, 16700A logic analyzers
  • Fluke 9100 series
  • Staubli JC4, JC5
  • Grosse C12, C13, C14, C20
  • Bonas CTR S250
  • Capcom System III

*May require system specific configuration .ini file

Disclaimer

SCSIknife is a ZuluSCSI™ Pico OSHW derivative compatible with the ZuluSCSI™ Pico firmware.

SCSIknife is licenced under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal.

Sources for the SCSIknife hardware are available on GitHub.

ZuluSCSI™ is a registered trademark of Rabbit Hole Computing.

Free worldwide shipping!

Shipping, handling and return

Shipping is done through La Poste courrier service, and will be transferred to your local courrier provider upon arrival in destination country. Free economy shipping is included in the final price to any location worldwide, this service is unregistered. Standard registered courrier service is also available for an extra fee. Delivery time for both services are 10 business day or less within Europe, or within 10-15 days to the US and Canada. Note that these delays are indicative and may sometime be exceeded, up to 4 weeks.

Shipping will be done within three business days from payment receipt, item will be shipped from Paris France.

If for some reason you are not pleased with your purchase please reach out through the eBay messaging system, I will work with you to solve the issue, or accept a return of the item on the day of arrival without restocking fee.

I combine shipping!

Thank you very much for looking at my items and happy eBaying!