220V Food Grade Stainless Steel Centrifugal Pump 10T/H for Milk Beverage Transfer

  Stainless steel centrifugal pump is specificalized for all the products which are related to food, such as dairy products, beverages, food, cosmetics, food additives. The centrifugal pump applies centrifugal force to produce speed, using a rotating impeller to increase the speed and push the fluid through the outlet valve.

This machine is suitable for water, beverage, fruit juice, soybean milk tea beverage, edible oil, etc.
https://topseller365.com/data/prd/025/344/1.jpg
 
voltage： 220V
power： 2200W
material quality： Stainless Steel
Lift of a pump: 24M(944.88in)
Pump flow: 10T
Inlet pipe diameter（external diameter）: 2IN(5.1CM)
Outlet pipe diameter（external diameter）: 1.5IN(3.8CM)
Maximum temperature: 100℃
Special precautions for products:
  BAW-10T-24M refers to a flow rate of exactly 10T when its head is 24 meters. When the customer is using it, 14-24 meters can be directly discharged. If it is less than this safety range, a safety valve needs to be added at the outlet to manually control the outlet flow rate (this safety valve needs to be purchased by the customer themselves, and we do not have this equipment).

Warning: 

1. Do not switch on the pump when it is empty. It will be easily damaged if the pump is operating with no liquid for a little while. Please be sure that there is enough liquid in the pump before you switch on!

2. Do not use this pump with liquid of strong acid and alkali.

3. Do not use this pump with high proof spirits or alcohol.

4.The installation foundation of the pump shall generally be a flat ground with sufficient strength, which shall be installed at the lowest position of the equipment as far as possible, that is, the position with the maximum lift height.

5.Do not idle the machine to prevent burning the motor.

6.Please do not let the machine run at full load for a long time, otherwise the motor overheating protection will cause tripping or stop working.

7.If the machine needs to work for a long time, please pay attention to the heat dissipation of the motor. The maximum number of hours the machine can work depends on the temperature of the environment. If the customer wants good heat dissipation, they can turn on the air conditioning to maintain a relatively cool temperature. Otherwise, they need to work for 4 hours to rest for a while until the heat dissipation is good before continuing to work, and so on.

 
Item include:

304 Food Grade Centrifugal Pump 10T/H*1

On Oct 28, 2024 at 01:47:15 PDT, seller added the following information:

DataCaciques