DescriptionYou are purchasing a NEW:
Black Gun Metal2 Carbon Fiber vinyl Fender RACING STRIPES for Both Sides.
These NEW Gun Metal2 Carbon Fiber vinyl Racing Stripes was cut out by the owner of the Predator Corvette C5. Its very easy to install, fits 1997 to 2004 Chevy Corvette C5 models. Does not fit any other vehicles.
The material is carefully cut, the Gun Metal2 Carbon Fiber vinyl gives you a beautiful factory appearance.
When installing the Racing Stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
We are not responsible for improper installation. If you have any questions before you purchase, please email us.
Note: These Racing Stripes fit the C5 stock models only, if your car has any change, or is custom made, they will not fit unless you use the same fender. Each kit is cut and designed for customers, they have been tested and installed before as you can see on the pictures. The design has been cut to give you a perfect touch, and a beautiful look.
What's included:
1. 1 Driver side set and 1 Passenger side set of Racing Stripes for C5.
About the Gun Metal2 Carbon Fiber vinyl:
Carbon Fiber vinyl by Schein Holographic's is ideal for automotive accents and any other surface that could use a touch of technical elegance. This metalized PVC film is easy to cut and weed and is even solvent-printable. It is suitable for application on flat surfaces and simple curves, and is rated for up to five years outdoors. Features: - For indoor or outdoor signage applications
- Up to 5 Years outdoor durability
- Organic, natural looking pattern
- Impressive strength and stiffness-to-weight ratios
Installation Recommendations:
This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 and professional installation.
Installation info: (refer to the picture charts for installation.)
When installing the racing stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
We are not responsible for improper installation. If you have any questions before you purchase, please email us.
Installation info:1. Measure approx. 26.5" from edge of hood and mark it with a piece of tape.
2. Lay the wider piece in place, do not remove bottom paper yet, just place it where the end meets the edge of the fender by the hood. Be sure to look at the bottom end by the fender to make sure that it is in the correct position to fold under the fender lip. Place 3 pieces of tape on the right side to locate the racing stripe when you take off the bottom paper to apply.
3. Remove the bottom paper and apply the wider racing stripe.4. Measure 30 7/8" from edge of hood and mark it with a piece of tape.Lay the narrower piece in place, do not remove bottom paper yet, just place it where the end meets the edge of the fender by the hood. Be sure to look at the bottom end by the fender to make sure that it is in the correct position to fold under the fender lip. Place 3 pieces of tape on the right side to locate the racing stripe when you take off the bottom paper to apply (gap between stripes approx. 3/4").5. Remove the bottom paper and apply the smaller racing stripe.6. Remove all tape . Be sure to push out any air bubbles. Note: on the fender end you may want to cut the end as needed with a razor or tuck it under the fender, sometimes the inside of the fender is too rough or dirty for it to stick and you will need to cut the excess off.
Installation Tips:This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 or professional installation.
Shipping information:
Shipping in the USA: Free Shipping.
International Shipping: Shipping is calculated by your Country and zip codes. USPS Priority International (6-10 Business days)
International Buyers: We don't have knowledge of other country's laws outside of the USA so please make sure that your postal service will allow the item into your country before buying them. We are not responsible for custom taxes or levies your country may charge you.
|
