Hinweis: Der Käufer ist für die Zollgebühren verantwortlich. Danke.

Note: Buyer is responsible for customs duties. Thanks.


Supermicro H11DSi Motherboard, not NT

The revision of the motherboard is REV 2.0.

Specifications 


Product SKUs

MBD-H11DSi
  • H11DSi
MBD-H11DSi-B
  • H11DSi (Bulk Pack)

Physical Stats

Form Factor
  • E-ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.1cm)

Processor/Chipset

CPU
  • Dual AMD EPYC™ 7001/7002* series Processors (*Board revision 2.x required)
  • Socket SP3
  • Up to 240W TDP
Cores
  • Up to 32 Cores
  • Up to 64 Cores (Board revision 2.x required)
Chipset
  • System on Chip

System Memory

Memory Capacity
  • 16 DIMM sockets
  • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
  • Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required)
  • 8-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

On-Board Devices

SATA
  • SATA3 (6 Gbps)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • 2 1GbE LAN via Intel® i350-AM21
  • 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA
  • ASPEED AST2500 BMC

Input / Output

SATA
  • 10 SATA3 (6 Gbps) ports
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 4 USB 2.0 ports (2 rear + 2 via header)
VGA
  • 1 VGA port
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connector
  • 1 TPM 2.0 header


Expansion Slots

PCI-Express
  • 3 PCI-E 3.0 x8
  • 2 PCI-E 3.0 x16

M.2
  • Interface: 1 SATA/PCI-E 3.0 x2
    (Platform with EPYC 7002 processor only supports PCI-E type M.2 module)
  • Form factor: 2280, 22110
  • Key: M-key


Payment
1. We accept all kinds payment.
2. The buyer is responsible for customs duties.


Shipping

1. We guarantee to ship out within 24 hours after payment confirmation(except Holiday).
2. If there is any unexpected situation（for example,if the order can not ship out within 24 hours),we will contact you as soon as possible,and follow up closely to ship your order soon.

3. All products will be tested strictly before shipping.

4. We ship to Paypal address ONLY.Please make sure your address in Paypal is matched with your shipping address before you pay.


Contact US
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.



Chassis ( Optimized for H11DSi )

2U
  • SC213AC-R1K23LPB
  • SC216BE1C4-R1K23LPB
  • SC825TQC-R802LPB
  • SC826BE1C4-R1K23LPB
  • SC829HE1C4-R1K62LPB
3U
  • SC836BE1C-R1K23B
4U
  • SC745BAC-R1K28B2
  • SC846BE1C-R1K23B

System BIOS

BIOS Type
  • AMI 128Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1

Management

Software
  • Super Doctor 5
  • Watch Dog
  • NMI
  • SUM
  • IPMI 2.0, KVM with dedicated LAN
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery

PC Health Monitoring

CPU
  • Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby
  • CPU switching voltage regulator
  • Supports system management utility
  • VBAT
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Dual Cooling Zone
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
  • UID


Operating Environment / Compliance

Environmental Specifications
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)