FOXWELL T2000 Pro TPMS Relearn Tool, Activate/Relearn All Sensors, TPMS Scan Tool Read/Clear DTCs, Read Sensor Data, TPMS Programming Tool Only for T10 Sensors (315/433MHz)

About This Item:

Programming FOXWELL TPMS Sensors

Note: This TPMS programming function can only work with FOXWELL T10 sensor.

With this TPMS programming tool, you can program FOXWELL exclusive T10-sensor to meet the specifications of a particular vehicle before new sensor installation and relearn. Therefore, the healthy T10 Sensors can measure tire pressure and temperature accurately, allowing you to know tire health conditions, which can replace more than 95% of the original or OEM sensors. 3 different sensor programming methods are supported by This FOXWELL TPMS programming tool T2000 Pro: Copy by Activation; Manual Create; Automatic Create; Copy By OBD. (Note: T2000 Pro only program a replacement sensor only if it is the FOXWELLT10 sensor.)

Copy by Activation

If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.

The Clone By Activation function lets users automatically write in the retrieved original sensor data to the FOXWELL Sensor which is used after the original sensor is triggered. 1)Highlight TPMS from the Main Menu and select the vehicle model as need. 2) Select Programming--Clone by Activation from the available menu. 3)Place the T2000 Pro tool near the original sensor to be copied and press Activate to continue. 4)After trigger successfully, press Y to continue. 5)Place a new FOXWELL sensor near the TPMS tool (around 0-20 cm).6)Press Y to start the programming when the tool detect the sensor.7) Press N to exit after the programming successfully.

Copy by Manual Input:

If you know the original sensor ID, you could input the ID to program new sensor.

The Manual Create function lets users to input the sensor ID manually. Input sensor ID. 1)Highlight TPMS from the Main Menu and select the vehicle model as need. 2)Select Programming--Manual Create from the available menu.3)Input the sensor ID in the dialog box and press Y to continue.4)Place a new FOXWELL sensor near the TPMS tool (around 0-20 cm).5)Press Y to start the programming when the tool detect the sensor.6)Press N to exit after the programming successfully.

Auto Create 1-16 Sensors

If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Intall new sensor ID--program new sensor-->perform tpms learning and let the car recognize new sensor After programming the new sensor, you need to perform tpms learning function to learn the new sensor ID to your car. The tpms learning method will vary on specific car models.(the car shown in our video is cadillac XT5, and it's using static learning method.) The tpms tool will show you what kind of learning method you car will apply.

The Automatic Create function is to program FOXWELL sensors by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID.1) Highlight TPMS from the Main Menu and select the vehicle model as need.2) Select Programming--Automatic Create from the available menu.3) Place new FOXWELL sensors(1-16) near the TPMS tool (around 0-20 cm).4) Press Y to start the programming when the tool detect the sensor. 5) Press N to exit after the programming successfully.

Note: T2000 Pro only program a replacement sensor only if it is the FOXWELL brand.Almost all tpms programming tool in thie field have the same limitation. For example, if you purchase tpms programming tool from B brand, you should also purchase B brand sensor to peform this TPMS programming function

Copy By OBD

This function lets users to write in the saved sensor information to Foxwell sensors after performing Read IDs from Vehicle in Learning function.
To create sensor ID manually:
1)Highlight TPMS from the Main Menu and select the vehicle model as you need.
2)Select Programming--Clone by OBD from the available menu.
3)Connect the TPMS tool with the vehicle via OBDII cable and turn the ignition on.
4)Select the sensor ID to be copied after reading ID information successfully and press Y to continue
5)Place a new Foxwell sensor near the TPMS tool (around 0-20cm)
6)Press F3 to start the programming when the tool detect the sensor.
7)Press F1 to exit after the programming successfully.

Activate Almost All TPMS Sensors

This FOXWELL TPMS scan tool T2000 Pro enables you to activate 98% known OEM/Universal TPMS sensors in the market. You can rapidly and accurately trigger and decode sensors to read their ID, pressure, temperature, battery, frequency and OE Part number before servicing the tires/wheels or when you are performing programming or relearn. No need to purchase a separate activation tool. The sensor activation will be finished in seconds through two methods: in All wheel mode and in Single wheel mode.

how to perform sensor activation function and how to read the OEM sensor information? Firstly, choose correct menu according to the car make/model/year and click menu "sensor activate". Then, put the T2000 Pro tpms tool near to the tire sensor and click "trigger" button to begin the activation.

Q: for example, if the car is 2017 Cadillac XT5, how can I locate the correct menu to perform sensor activation? A: choose "TPMS"---"USA"---"Cadillac"---"CT5"--->

2016/01-2021/06(433 MHz)(13598773)

2018/01-2021/12(433 MHz)(13516165)

2017/01-2019/12(315 MHz)(13589597)

2018/01-2020/06(315 MHz)(13516164)

There are 4 menu options and how to choose the right one? Firstly, you could exclude two menus if you know your key fob frequency. For example, if your key fob frequency is 433 MHz, you could exclude the last two menu with 315 MHz, and the right menu will be located on the first two. Then you could try both first two menus with 433 MHz and see which one will work for your car. If you don't know the key fob frequency, you could also try all the four menus to see which one will work on your car.

Tips: during the activation, remember to place the T2000 Pro near the tire sensor or it will fail to receive the singal. If one menu option fails to work on your car, kindly try other menu options or contact for support.

FOXWELL T2000 Pro three types of TPMS sensor relearn

FOXWELL T2000 Pro TPMS Relearn Tool can be served as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 99% vehicle with TPMS system and extremely popular among car repair ships and DIY car owners. To ensure T2000 Pro compatible with different vehicles , 3 types for TPMS sensor relearning are offered : 1) Stationary Relearn; 2) Auto Relearn ; 3) OBD Relearn.

Stationary Relearn

vehicle in learning mode to trigger sensors and learn sensor.

Auto Relearn

can be completed by driving. 

OBD Relearn

T2000 Pro allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool T2000 Pro.

Notice:

1.If your old sensors are dead or cannot be scanned, this function may fail.

2.If you need to perform sensor cloning function, you should know your old sensor ID first. If no, you could use other scanner to scan the old sensor ID first, then use FOXWELL T2000 Pro to perform sensor cloning.

FOXWELL T2000 Pro TPMS Health Maintenance Expert

Full OBDII Function