DEA Compatible Radio Receiver Module in Housing 2-kanal universal Empfänger for DEA MIO TR2 / TR4, DEA MIO TD2 / TD4 Handheld Transmitter 12-24V AC/DC

Universal 2-channel 12-24V AC/DC receiver.
Can be programmed with: DEA MIO TD2 / MIO TD4 / MIO TR2 / MIO TR4 / GENIE / PUNTO-2 / PUNTO-4 / DEA 433-1 / DEA 433-2 / DEA 433-4 remote controls.
Frequency: 433.92 MHz fixed / rolling code.
Range: up to 100 - 200 meters.
Memory up to 400 remotes.
This universal 433.92Mhz rolling / fixed code 2-channel receiver 100% compatible with DEA MIO TD2 / MIO TD4 / MIO TR2 / MIO TR4 / GENIE / PUNTO-2 / PUNTO-4 / DEA 433-1 / DEA 433-2 / DEA 433-4 433 ,92MHz remote controls. The 2 channels allows you to operate 2 different garage gates and /or other electronics using your original DEA remote. Parameters: 433.92Mhz rolling / fixed code frequency 2-channel receiver Memory: Up to 400 remotes! Instructions for programming receiver: learning new remotes: Press "learn 1" or "learn 2" button - Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking and go off - This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory--> Press "learn 1" or "learn 2" and keep holding until Learn LED will go off - Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (push button) in parallel to push button. All you need to do is to connect this receiver to your control board by using only 4 wires (2 - for power; 2 - for relay!!!) Note: The abriviations of your board can be different, so follow your manual. VIDEO INSTRUCTIONS FOR PROGRAMMING RECEIVER: https://www.youtube.com/watch?v=NfpZvDAadWU&feature=youtu.be .