Novoferm Novotron compatible hand transmitter, 2-channel receiver for Novoferm 502 MAX43-2, MAX43-4, MNHS433-02, MNHS433-04, MCHS43-2, MIX43-2, Novotron 512. 12-24V AC/DC, NO/NC 433 .92Mhz Rolling

Universal 2-channel 12-24V AC/DC receiver.
Can be programmed with: Novoferm Novotron 502 MAX43-2, MAX43-4, MNHS433-02, MNHS433-04, MCHS43-2, MIX43-2, Novotron 512 remote controls.
Frequency: 433.92 MHz fixed / rolling code.
Range: up to 100 - 200 meters.
Memory up to 400 remotes.
 This universal 433.92 MHz rolling / fixed code 2-channel receiver 100% compatible with Novoferm Novotron 502 MAX43-2, MAX43-4, MNHS433-02, MNHS433-04, MCHS43-2, MIX43-2, NOVOTRON 512 433, 92MHz MHz 92MHz S The 2 channels allows you to operate 2 different garage gates and /or other electronics using your original Novoferm Novotron remote control. Parameters: 433.92Mhz rolling / fixed code frequency 2-channel receiver Memory: Up to 400 remotes! Instructions for programming receiver: learning new remotes: Press "learn 1" or "learn 2" button - Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking and go off - This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory--> Press "learn 1" or "learn 2" and keep holding until Learn LED will go off - Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (push button) in parallel to push button. All you need to do is to connect this receiver to your control board by using only 4 wires (2 - for power; 2 - for relay!!!) Note: The abriviations of your board can be different, so follow your manual. VIDEO INSTRUCTIONS FOR PROGRAMMING RECEIVER: https://www.youtube.com/watch?v=NfpZvDAadWU&feature=youtu.be .