Professional Adhesive & Bonding Solutions
Conformable Foam Bonding Dots | 2, 5 or 10 Dot Pack | 69mm (2.72") Diameter
🌟 EXTREME CONFORMABILITY & GAP FILLING
🔬 ADHESIVE SCIENCE: 3M™ VHB™ Modified Acrylic & Conformable Foam
3M™ VHB™ Tape 5952 features a modified acrylic adhesive on both sides of a very conformable, black acrylic foam core. It is designed to replace liquid adhesives, rivets, spot welds, and screws.
• Shock & Vibration Absorption: The viscoelastic foam core absorbs energy and relaxes stresses, providing a durable bond that resists wind, vibration, and thermal expansion.
• Permanent Sealing: The closed-cell structure creates a 100% waterproof and dustproof seal against moisture and environmental elements.
• Broad Material Compatibility: Exceptionally formulated to bond to powder-coated paints, rigid plastics, glass, and medium-to-high surface energy metals.
1. CLEAN: Strip all oil, dust, and wax using 50:50 IPA/Water. Surface must be bone dry. For heavily soiled surfaces, a degreaser followed by IPA is recommended.
2. ALIGN (PRO TIP): At 69mm, handling this larger dot requires care. Do not touch the black adhesive with bare fingers. Leave the red liner on, position carefully, and press the exposed side down slowly from one edge to the other to avoid trapping air bubbles.
3. APPLY & PRESS: Apply firm, even pressure (approx. 15 psi) across the entire 69mm surface. This is critical for VHB—pressure causes the foam to flow and "wet out" into the micro-texture of the substrate.
4. DWELL: VHB is a pressure-sensitive adhesive that builds strength over time. Allow 72 hours at room temperature for the acrylic polymers to fully interlock and reach 100% maximum structural strength.
Q: Is this genuine 3M™ VHB™? How can I tell?
A: 100% Genuine. The red PE release liner features the authentic repeating "3M VHB" logo print in white, and the core is the signature black acrylic foam.
Q: Will this work on textured surfaces or car dashboards?
A: YES! The 5952 features a 1.1mm thick, highly conformable foam core. It is specifically engineered to compress, adapt to surface irregularities, and physically interlock with heavily textured surfaces and gently curved plastics.
Q: Is the bond waterproof and heat resistant?
A: Yes. Because the foam is "closed-cell," water cannot pass through it. Once fully cured, it is highly resistant to moisture, UV, and temperature fluctuations up to 300°F (149°C) short-term.
Q: Is it easy to remove later?
A: 3M VHB is designed for PERMANENT structural bonding. It is exceptionally strong. Removal requires cutting through the foam core with dental floss or a wire, followed by heavy scraping or specialized adhesive removers to clear the residue.
At GXPMAX-Industrial, we guarantee 100% Genuine 3M™ materials. Fresh Authentic Stock, precision die-cut from master rolls and stored in climate-controlled conditions for maximum shelf life.