Choose Vinyl Type (Self-adhesive OR HTV Iron on Transfer), Color and Size from the drop-down box.

There is no background to the decals. If there is a background color/lines in the picture it is used only as an example. The background color will be the color of the surface you apply this decal to, or clear if you apply this to a window.

SELF-ADHESIVE VINYL DECAL INFO

* These decals come in three layers:

1. Top layer is transparent layer called transfer tape. 

(This keeps your decal/sticker together until it is applied)

2. Middle layer is your actual decal. (This is basically sandwiched between your transfer tape and wax backing)

3. Bottom layer is the wax backing. 

(protects the adhesive until the decal is ready to be applied)

* General application TIPS:

1. Never apply decals to a extremely hot or cold surface. 2. Ideal installation temperatures will be between 60 and 90 degrees. 

3. Do not touch the adhesive backing your finger oils will prevent the decal from sticking.

* Application Instructions:

1. Rub the sticker to ensure that the transfer tape is adhered to the decal.

2. Clean and dry the surface the decal will be applied to. Decals will stick best to a clean, dry and smooth surface.

3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent tape.

4. Carefully position your decal to the desired area.

5. Rub the sticker from one side to the other, getting rid of any air bubbles.

6. Use a credit card, squeegee and go over the decal to ensure it has adhered to the desired surface.

7. Slowly remove the transfer tape, making sure no part of the decal remains on the transfer tape.

8. Check for air bubbles. In most cases air bubbles can be worked out to the edge of the sticker.  If you have trouble getting a air bubble out you can simply poke the bubble with a thumb tack or pointy object and pop the bubble

HEAT TRANSFER VINYL IRON ON INFO

Heat Transfer Vinyl Iron On For DIY Shirts, pillow case, tote bag, canvas or any other fabric

Image will have to be applied to fabric surface with heat such as, an iron or heat press.

Will adhere to any fabric such as, shirts, pillows, blankets, potholders, tote bags,  etc..

1.)  Application instructions (Home Iron):

• Set an iron dial between cotton and wool.

• Cover design with a cover sheet (Teflon sheet).

• Place on a flat, hard surface (ironing board not recommended)

• Press the iron with medium or firm pressure (do not slide iron)

• Press each section of the design for 10–15 seconds.

• If areas of the design lift after application, apply cover sheet and press for 10–15 seconds.

• Peel carrier cold.

• Cover the completed design and press for 5–10 seconds.

2.)  Application Instructions (Heat Press):

• Preheat garment for 2-3 seconds.

• Apply design at 302 ℉.

• Use light or medium pressure for 10–15 seconds.

• Peel carrier cold.

Cool Peel:

• Peeling the clear pet film after the vinyl turns cold causes a matting effect (it is recommended to wait 15–30 seconds for the vinyl to cool down).

• If any part of the iron on the vinyl lifts off, repeat the steps above until you can peel off the clear backing without lifting up the vinyl.

Shipping

Free First Class shipping in the United States!! Expedited shipping is offered at the buyers expense generally 3-4 days and comes with a tracking number. If you choose expedited shipping and order multiple items I will combine shipping. You will only be charged one shipping fee for all items ordered from any of my Vinyl Decal listings. Just let me know you are ordering multiple items and I will send you an invoice before you pay to ensure you don't get multiple shipping charges