MonsterBolts_Electrical_Butt_Connectors_Logo
Our MonsterBolts Butt Connectors start with a heavy-duty seamless Tinned Copper barrel that ensure strong secure crimping with absolute minimal electrical current drop. These are covered with premium heat-shrink adhesive-lined Polyolefin tubing for a secure, waterproof seal with a 3:1 shrink ratio. These are clearly stamped with AWG wire gauge range and our MB logo. UL rated and RoHS compliant product.

Color: Yellow
Wire Size: 12-10 AWG
Part #: MB-B10
Brand: MonsterBolts
Type: Crimp and Seal with Heat Shrink Tubing
Seam Type: Seamless

INSTRUCTIONS:

1. Strip both wires, wire length 5/16" (8mm)

2. Insert wire into barrel

3. Crimp wire to barrel

4. Heat tubing

NOTE : Crimping tool and Heat Source to reduce tubing and seal connector needed. Butane Torch and Ratcheting Crimp tool recommended. Questions, Please ask.

* There is no official UL Standard for 'waterproof' electrical connectors. Connectors would most likely fall in the IP67 range (IP - Ingress Protection, 6 - Totally protected against dust, 7 - Protected against the effects of temporary immersion between 15cm and 1m. Duration of test 30 minutes)