To apply decal:

Clean the Surface:

• Thoroughly clean the surface where you plan to apply the decal.

• Dry the surface with a lint-free cloth or paper towels.

Position the Decal:

• Hold the decal up to the surface where you want it to be. You could use masking tape to hold it in place temporarily if needed.

• Step back and check the alignment. Adjust as necessary.

Peel the Backing Paper:

• Carefully peel off the backing paper from the decal, ensuring that the decal remains on the clear transfer tape.

• If the decal doesn't stick to the transfer tape, lay it back down and press firmly again with a squeegee or credit card.

Apply the Decal:

• Starting from one side, gently place the decal onto the surface, pressing it down as you go.

• Use a squeegee or a credit card to smooth out the decal from the center outward to prevent air bubbles.

Remove the Transfer Tape:

• Slowly peel off the transfer tape at a 45-degree angle. Be careful to ensure the decal remains adhered to the surface.

• If any part of the decal lifts with the tape, lay the tape back down and press it firmly again.

Tips:

• Temperature: Apply the decal in a warm, dry environment. Extreme temperatures can affect the adhesive.

• Patience: Take your time during application to ensure the decal is properly aligned and free of bubbles.