
Application:It can be used to artificial pressing and heating molding of dentures (full denture, half denture)
Precautions:
1. The power outlet should be reliably grounded;
2. Do not touch the heater at work to avoid burns;
3. Strictly prevent metal and water from contacting the wire connector, and cut off the power supply when not working for a long time.
Operating method:
1. Overlap the two boxes buried according to the conventional method (the upper box should be inverted), put them in the center of the heating body, and rotate the pressing handle to press the box tightly;
2. Turn on the power supply; turn the heating timer clockwise to the pre-selected position for 20-25 minutes, and wait 20 minutes after the heating power is cut off to remove the box and cool it in room temperature water.
Specification:
Rated voltage:220v,50hz
Rated power:600W
Net Weight]:20kg
Outline dimensions:280x140x400mm;

