This 1-to-2 port Gigabit PoE Extender operates without local power, drawing power directly from the PoE input. It complies with IEEE 802.3af/at standards and supports DC 48V-57V passive PoE switches or injectors.

Key Features

  • Dual-Mode Operation: Features a physical toggle switch to select between standard and extended transmission modes.

  • STD Mode: Supports 10/100/1000Mbps speeds up to 100m via Cat5e/Cat6 cables.

  • CCTV Mode: Limits speed to 10Mbps to extend transmission distance up to 250m.

  • Power Distribution: 30W maximum power input. Provides up to 25W on a single PoE output port, with a combined maximum output of 25W across both ports.

Cascade Operation

  • Maximum 3 units can be cascaded in STD Mode when powered by an 802.3at switch (reaching up to 400m total distance and delivering approx. 7W to the end device).

  • Note: Using an 802.3af switch for cascading may result in insufficient power for end devices.

Technical Specifications

  • Ports: 1x PoE IN, 2x PoE OUT (10/100/1000Mbps)

  • PoE Standard: IEEE 802.3af/at & 40-57V Non-standard Passive PoE

  • Pin Assignment: 1/2(+), 3/6(-) or 4/5(+), 7/8(-)

  • Operating Temperature: -10°C to 60°C (14°F to 140°F)

  • Storage Temperature: -40°C to 85°C (-40°F to 185°F)

  • Humidity: 10% to 90% (Operating), 5% to 95% (Storage) - Non-condensing

  • Dimensions: 10.5 x 4.2 x 2.4 cm

  • Weight: 55 g

Item Included

  • 1x 1-to-2 Port Gigabit PoE Switch Extender