【MORE FLEXIBLE QUANTITY MATCHING】Saving is the most economical way. We have a combination of 300 tile spacers 1/16 inch, which avoids the waste caused by purchasing hundreds of pieces tile spacers in one time. You can purchase the corresponding quantity according to the actual situation, and it is more flexible to help you save money. You could use it with our tile leveling system 1/16 inch kit, it includes the basic requirements for your installation.
【STANDARD SEAM 1/16"】 The actual measurement of tile leveling spacers is 1.5mm, so it is closer to 1/16" on the market. We respond to the most realistic data, which reduces the trouble from incorrect size.
【MORE EFFICIENT USE REFERENCE】High-quality PVC forged 1/16 tile spacers (one-time), suitable for 1/8’’-1/2’’ thickness tiles. Tile gap >1/16 ''and <1/8‘’. One tile is recommended to use 4 tile leveler spacers, 12'' square tiles (Laying area approximately 75 sq.ft), 6''x 20'' (Laying area approximately 60 sq.ft) and 12''x 24' '(Laying area approximately 150 sq.ft.). If tile is large, it is recommended to use 6 tile leveler spacers.
【HIGH-QUALITY PLASTIC, EASIER TO DISASSEMBLE】We use more crispy high-quality PVC forged tile spacers 1/16 inch (one-time), the cut is obvious, thinner and easier to kick off. Avoid the trouble of cleaning caused by incomplete disassembly (warm reminder: Do not push so hard during use tile pliers)

From the manufacturer

Every Day at YEFU is Beautiful and Vibrant

We are a company made up of young people. Our dream is to be a century-old brand, and our group aims to carry on YEFU service and brand. No matter how difficult it is on the way, we want to do our best to bring better service to more customer. From material selection, transportation to service, in order to ensure the cost-effectiveness of the product, we did step by step tracking and step by step inspection to ensure that the product reaches your hands in the best state.

We thank those customers who have given us advice, because your presence has enabled us to continue to work hard. Here I would like to thank those friends who supported us and chose us again, because your support has given us the courage to move forward. We will continue to innovate and improve product quality of services, and hope the future will be better.

Thanks to everyone we met.

Alan and his team


1. Place the spacer according to the size of the tile.	2. Square the tile and tap it with a rubber hammer or level ruler.	3. Insert tile wedges and push it.	4. Push the wedge with pliers.


5. Clean the gap with blade between the cement.	6. When the ceramic tile glue or cement dries up, knock with a rubber hammer or kick off	7. We designed this break-point, in case it breaks inside tiles when do tile installation. If you use tile spacers first time, we suggest you use few tile spacers to develop a feeling for breaking point, then you could get use of it, and it will give you amazing results.	8. Tile wedges is reusable, tile spacers is disposable, the base part of the spacer is left under the tiles after installation.

Product Description

Products include

Size: 1/16 inch Tile Leveling System Clips (1.5mm)

Package contains: 300 Tile Leveling System Clips

Working with the Tile Leveling System 1/16" Kit

How to install:

1. Apply a proper amount of cement glue

2. Place tile spacer according to the size of tile

3. Square tile and tap it with a rubber hammer

4. Insert tile wedges

5. Adjust pliers screws to determine pushing distance (to ensure that each wedge is pushed at the same distance then ensure the same level of tile)

6. Push tile wedge with pliers

7. Clean the gap between cement

8. One tile suggests use four tile spacers

9. After 24 hours, kick out it, or tap side of the rubber hammer

Tips:

1. Do not apply too thick cement prevent clips will sink too deep, causing tile wedges can’t be inserted and difficult to disassemble.

2. Do not use excessive force when installing tile spacers with tile pliers, which may cause the spacer base break easily.

3. The tile spacer is disposable (warm reminder: although we check each one before leaving the factory, there is a possibility that some damage will occur during transportation), so please purchase sufficient quantity to ensure construction going well.

The 1/16 tile leveling clip has a unique V-notch design of 1/16’’!

The coverage of tile spacer depends on the quality and pattern of tile. We recommend leaving 10-20% more.

The tile leveling system is to push the tiles instead of lifting the tiles to provide better tile adhesion. It ensures the flatness between tiles, prevents the tiles from warping when the tiles solidify, and prevents the mortar from moving during solidification.

The tile leveling system facilitates the installation of tiles, saves installers time and minimizes the amount of work required for perfect flatness.