1/2" Hex Rotary Broach / Wobble Broach / Rotary Punch
1/2" Hexagon 1/2" Shank Diameter Rotary / Wobble Broach
MADE IN USA - IN STOCK SHIPS TODAY!
- .5045" across flat dimension +0/-.0005
- Includes rake angle at face
- Made from PM M-4 High Speed Steel
- Fits most common rotary broach holder brands
- .500" Shank Diameter x 1.75" Length
- Reaches .800" deep and can be sharpened
- Designed for blind holes and through holes
- FREE SHIPPING
Meets ASME B18.3-2003 standard for Hexagon Sockets
| Nominal Size | Across Flats (A) | Broaching Depth (B) | Shank Dia | OAL |
|---|---|---|---|---|
| 1/2" Hex | .5045 | .800" | 1/2" | 1.75" |
Polygon Solution’s 1/2″ Hex Rotary Broach cutting tools are designed for superior performance when machining aluminum, brass, and mild steel. Polygon recommends drilling the pilot hole 3% oversize for hexagon forms. Pilot holes should also include a 45° chamfer and extra depth for chip accumulation. Expect reduced tool life when broaching tougher materials and tighter pilot holes.
PRE-DRILL SIZE
The Recommended Pilot Hole Diameter for a 1/2″ Hex is: .519″
The Recommended Minimum 45° Chamfer for a 1/4″ Hex is: .583″
SPEEDS AND FEEDS
Start with minimum feed rate of .002-.003 IPR and 700-800 RPM.
SET-UP AND INSTRUCTIONS
Additional Instructions Can Be Found Here:
https://www.polygonsolutions.com/images/Rotary-Broach-Hole-Prep-Speeds-Feeds.pdf
ROTARY BROACH TOOL HOLDER
For use with Polygon Solutions' Rotary Broach Tool Holder:
Sold Separately on eBay here:
https://www.ebay.com/itm/NEW-Rotary-Broach-Wobble-Broach-Tool-Holder-3-4-shank-for-1-2-shank-broaches-/122727972607