eBay

The AW-SYL-2352P is a Wi-Fi-capable PID controller based on Auber's ramp/soak PID controller SYL-2352P. This unit does everything a regular SYL-2352P does and has 2.4 GHz Wi-Fi connectivity, which allows a user to access the controller remotely through the AuberWifi app anywhere with an internet connection.

This unit (AW-SYL-2352P) has a 12VDC output for controlling an external solid-state relay (SSR). For a similar controller with relay output, please check AW-SYL-2342P instead (ebay id 204897271627).

Model	Output	Ramp Soak	eBay ID
AW-SYL-2352	SSR (12V DC)	No	204134663649
AW-SYL-2342	Relay	No	116259212075
AW-SYL-2352P	SSR (12V DC)	Yes	116259226616
AW-SYL-2342P	Relay	Yes	204897271627

Wi-Fi Connectivity Features:

Monitor the current probe reading, view the data plot, and export historical data (note 3).
Monitor the status of the main output and the alarm relays.
Access and edit the ramp/soak program from the app.
Control the ramp/soak program status (Run/Hold/Stop) from the app.
Access and edit all parameters from the app.
Receive alarm notifications pushed to your phone when the app is closed.
Easy pairing process. Compatible with most modern routers with 2.4 GHz WiFi bands.
Manage multiple AuberWifi (AW) series devices in one app.
Capable of receiving updates over-the-air (OTA).
The AuberWifi app is available for both iOS devices and Android devices.

AuberWifi device list page. Manage multiple devices in the same app.

AuberWifi device main page for AW-SYL-2352P.

Main Features of SYL-2352P

This PID temperature controller is a 1/16 DIN controller with a two-line display. It has all the basic control functions of the standard PID controller such as SYL-2352 except the "manual control mode". AW-SYL-2352P has one SSR output as its main output. This output is a 12 VDC signal for controlling external solid-state relays (SSRs).

This ramp/soak controller can allow up to 30 steps programmed, making it suitable for applications that require complex heating profiles such as controlling heat treatment ovens. In each segment of the heating profile, a user can specify the start point of the temperature, the endpoint of the temperature, and the time duration during which this ramp/soak step should last. In addition, special actions can also be programmed: hold the program, stop the program, jump to a specified step, activate or deactivate one or both alarm relays.

Feature Summary of SYL-2352P

30 programmable steps to implement ramp, soak, and other control actions.
Step timers can be set from 1 min to 9999 min.
PID control with fuzzy logic enhancement.
Two alarm relays that can be triggered by temperature or be programmed.
0.2% accuracy over the entire input range.
Temperature can be displayed in either Fahrenheit or Celsius.
Parameter-lock option.
High brightness, large digital LED module that can be read from a distance.

Main Specifications

		AW-SYL-2352P
Input Type	TC: K, E, S, WRe, J, T, B, N RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm. DC voltage: 0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC current: 4~20mA.
Input Range	K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF)Pt100 (-320~1100ºF), Cu50 (-60~300ºF) Linear input (note 2): -1999~+9999 defined by user
Display Module	Two-line, four digits. Digital LED model.
Display Resolution	1°C and 0.1 °C, or 1°F.
Accuracy	±0.2% or ±1 unit of the full input range
Control Mode	Fuzzy logic PID, On/Off
Main Output		12 VDC for external solid-state relays (SSRs)
Alarm	Process high/low alarm, deviation high/low alarm
Alarm Output	Relay contact (Resistive): 1 A at 240 VAC, 3 A at 120 VAC, or 3 A at 24 VDC
Power Input	85 ~ 264 VAC / 50 ~ 60 Hz
Overall Dimensions	1.89" x 1.89 x 3.94" (48 x 48 x 100 mm)
Mounting Cutout	1.77" x 1.77" (45 x 45 mm), 1/16 DIN
Warranty	6-month limited warranty. See details here.

Wi-Fi Connectivity Specifications

Wireless Standards	2.4 GHz, IEEE 802.11 b/g/n
Security Protocols	WPA/WPA2/WPA2-Enterprise

Note 1. Main default settings on the controller:

Input sensor type: Type K thermocouple (SN = 0).
Temperature unit: Fahrenheit (°F)
Display resolution: 1 degree.

Note 2. The current AuberWIFI app offers limited support for linear input sensor types such as DC voltage and DC current input signals. The app fully supports all compatible temperature sensor types.