ICE Ignition 7 AMP 1 STEP Boost Retard Control Box
PLEASE NOTE: The ICE Ignition 7061BR Controller requires an appropriate ICE Ignition Distributor and the ICE Ignition Pro Series 4100 Coil for Forced Induction Engines. It is NOT possible to use another distributor or coil.. It is NOT possible to use another distributor. All ICE Ignition Distributors have a Field Effect Sensor installed in the distributor. Without this sensor, the ICE Ignition 7061BR controller would not work. We sell the ICE Ignition Distributors individually for most 6-cylinder and V8 engines on eBay.
The ICE Ignition 7061BR Street/Race Series Control Box features the following.
- 10 Pre-programmed Boost Retard curves - The push-button selectable curves enable fine boost control through timing retardation. With the ICE Ignition 7061BR, you can vary timing from 0.1 to 1.0 degrees of timing per pound of boost. The MAXIMUM degrees of boost retard possible is 22 degrees. It eliminates the need for distributor re-graphing when engine upgrades are introduced. It allows you to adjust total timing for changes in fuel quality.
- Manifold Absolute Pressure (MAP) Sensor - The MAP sensor detects when your engine is generating boost and will automatically retard timing depending on the amount of boost detected and the "Retard Select" position used.
- Single Rev Limiter (1-STEP) - A push-button selectable rev limiter adjustable in 100 RPM increments. It provides great insurance against accidentally over-revving your engine by cutting out the spark.
The ICE Ignition controller must be mounted inside your car. Do not mount it inside your engine bay. ICE Ignition strongly recommends the use of NON-RESISTOR Spark Plugs.
Key Features
- 10 Predefined Boost Timing Curves - Selectable from the controller
- Rev Limiter - For Over-Rev protection. Selectable from the controller
- MAP Sensor - Detects level of boost and automatically retards timing
WHAT'S IN THE BOX?
The ICE Ignition 7061BR Controller includes the following
- 1 x ICE Ignition 7061BR Controller
- 1 x ICE Ignition 2-metre Wiring Loom
- 1 x ICE Ignition Manual
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans"></div>
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans"></div>
We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.
The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.
Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity.
If you can't find the product in our store please contact us via eBay Message.
Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes
- Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
- Ignition Leads for cars and boats with inboard & outboard engines
- Ignition Coils
- Voltage Boosters
We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes
- Bike Racks
- Roof Racks,
- Tablet Mounts
- Rod Holders
- Bait Boards
- GPS & Fish Finder Mounts
- Cup Holders
- Storage Products
- Dive Tank Holders
- & More
All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.
We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.
If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.
We accept payment by any of the following methods:
- PayPal
- Funds Transfer (account details provided during checkout)
We ship our goods to Australia, New Zealand, Europe and the US.
- Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
- New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".
Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.
If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.
At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.
That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.
Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.
Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.
You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.
We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.
The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.
ICE Ignition 7 AMP 1 STEP Boost Retard Control Box
PLEASE NOTE: The ICE Ignition 7061BR Controller requires an appropriate ICE Ignition Distributor and the ICE Ignition Pro Series 4100 Coil for Forced Induction Engines. It is NOT possible to use another distributor or coil.. It is NOT possible to use another distributor. All ICE Ignition Distributors have a Field Effect Sensor installed in the distributor. Without this sensor, the ICE Ignition 7061BR controller would not work. We sell the ICE Ignition Distributors individually for most 6-cylinder and V8 engines on eBay.
The ICE Ignition 7061BR Street/Race Series Control Box features the following.
- 10 Pre-programmed Boost Retard curves - The push-button selectable curves enable fine boost control through timing retardation. With the ICE Ignition 7061BR, you can vary timing from 0.1 to 1.0 degrees of timing per pound of boost. The MAXIMUM degrees of boost retard possible is 22 degrees. It eliminates the need for distributor re-graphing when engine upgrades are introduced. It allows you to adjust total timing for changes in fuel quality.
- Manifold Absolute Pressure (MAP) Sensor - The MAP sensor detects when your engine is generating boost and will automatically retard timing depending on the amount of boost detected and the "Retard Select" position used.
- Single Rev Limiter (1-STEP) - A push-button selectable rev limiter adjustable in 100 RPM increments. It provides great insurance against accidentally over-revving your engine by cutting out the spark.
The ICE Ignition controller must be mounted inside your car. Do not mount it inside your engine bay. ICE Ignition strongly recommends the use of NON-RESISTOR Spark Plugs.
Key Features
- 10 Predefined Boost Timing Curves - Selectable from the controller
- Rev Limiter - For Over-Rev protection. Selectable from the controller
- MAP Sensor - Detects level of boost and automatically retards timing
WHAT'S IN THE BOX?
The ICE Ignition 7061BR Controller includes the following
- 1 x ICE Ignition 7061BR Controller
- 1 x ICE Ignition 2-metre Wiring Loom
- 1 x ICE Ignition Manual
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans"></div>
<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans"></div>
We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.
The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.
Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity.
If you can't find the product in our store please contact us via eBay Message.
Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes
- Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
- Ignition Leads for cars and boats with inboard & outboard engines
- Ignition Coils
- Voltage Boosters
We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes
- Bike Racks
- Roof Racks,
- Tablet Mounts
- Rod Holders
- Bait Boards
- GPS & Fish Finder Mounts
- Cup Holders
- Storage Products
- Dive Tank Holders
- & More
All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.
We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.
If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.
We accept payment by any of the following methods:
- PayPal
- Funds Transfer (account details provided during checkout)
We ship our goods to Australia, New Zealand, Europe and the US.
- Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
- New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".
Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.
If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.
At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.
That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.
Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.
Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.
You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.
We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.
The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.