Description:

GCB-1 is a machine designed for the secondary curing process of post SLA printed models. Models being in this process will gain an optimum appearance and function to the largest extent.

Features:

※ Fast Assembling Structural Design

Using acrylic boards as its main assembling pieces, it can be assembled and detached easily. The machine supports the secondary curing function of SLA models.

※ Timing Setting

Wide range of timing setting: 1~60 mins. The machine allows you to set the timing in a wide range. Once the time finishes counting down, UV lamps and motor will be automatically shut down.

※ Evenly Curing With 360° Rotating Tray

With 7 rounds per minute its tray performs, this curing box leaves no dead angle, which offers the processed models a far smoother and evener appearance.

※ Intelligent Protection

The machine will come to a halt automatically when the box is opened, with the UV lamp beads and motor shut down right away, and timing stops counting down. Once the box is closed again, it will resume working.

※ Exquisite Whiteware Acrylic Board

Tested by professional device, this curing box posts no risks at all when it is in the working status. It has been proven that it gives off a lower leakage of UV light when it is at work.

※ Customized Lamp Board, Covering the Whole Box

Equipped with six UV lamps, the curing box will operate a far more effective curing process with its luminous power of 220W/m².

※ Simple, Unique and Innovative Control Panel

With dual-color indicator light, three easy-to-apply buttons and digital tube for timing display, it features a higher practicability.

NOTE: Please make sure that the printed model has been washed in advance, or the secondary curing process will cause a pale surface on the finished model.

Specification:

Power Input: DC 12V

Power Adapter: Input: AC 100-240V，50~60Hz,Output:12V  

UV Lamp Wavelength: 405nm

Rotating Speed: 7r/min

Curing Size: Φ185mm×180mm

Product Size: 217(L)×204(W)×228(H)mm

Packing Size: 295(L)×270(W)×120(H)mm

Product Weight: ~1.3kg

Package Weight: ~1.72kg

Packing List:

1. Control Panel *1

2. User Manual *1

3. After-sell Service Card *1

4. Power Adapter *1

5. Screw *8 (Two different kinds)

6. Nut *6

7. Screwdriver *1

8. Lever *1

9. Rubber Band *20

10. Acrylic Board Unit *6

     GEEETECH  UV Resin Curing Lamp Curing Box GCB-2 For 3D Printer 264×298×338mm

Product Info

GCB-2 is a large size secondary light-curing equipment for light-curing 3D printing models.It can be adapted to DLP/SLA/LCD type 3D printers with maximum printing area 10.1 inch .The box body adopts a modular design. You can assemble it simply and quickly. High-power quartz lens UV lamp beads are used inside the box, combined with the 360° rotating tray at the bottom, can quickly and uniformly cure the model placed in it, and effectively improve the strength and surface finish of the model. The box uses a simple and easy-to-use timing controller. Users can customize the curing time according to their needs. The user does not need to pay attention to the curing work. After the setting curing timing is over, the equipment will automatically stop the curing work. GCB-2 is the best partner for light curing printers.

Main Features

※ Curing function: the equipment uses 6 high-power quartz lens UV lamp beads, with excellent light conversion efficiency, the central light power can reach 220W/m ². It is far superior to the similar products in the market which uses Silicone lens, achieving high optical power and reducing energy consumption at the same time;

※ Timing work: the timing controller is specially designed for the equipment. The working time can be customized according to the needs, time range can be set to 1-60 minutes. After the setting timing is over, the equipment will automatically stop the light curing work. Compared with other equipment without customized timing controller, there is no need to worry about the problem of forgetting to close the curing equipment due to carelessness;

※ Automatic protection: in order to prevent the damage of ultraviolet to human body, the equipment is designed with an automatic door opening protection device. When the equipment is in operation, if the box door is opened, the control box will stop the curing work, and the countdown will be suspended. If the box door is closed again, the curing work will resume, and the previous curing work will continue;

※ 360 degree rotating tray: when the equipment is working, the model tray at the bottom will rotate 360°Continuously with rotation speed 4R / min, which can make the model evenly exposed to ultraviolet radiation;

※ Safe box material: the box material can shield 99.9% ultraviolet rays. Testing by professional instruments, the ultraviolet intensity of the outer wall of the box is almost zero, so users can use it safely and freely;

※ Fast assembly structure: the equipment adopts modular design, and users can quickly assemble the equipment according to the instructions;

※ Large curing space: compared with GCB-1, GCB-2 hasΦ250mm x 250mm (H) curing space, suitable for 10.1 inch LCD 3D light curing printer;

※ Simple and easy to use: the control box is designed with three buttons, which are simple and clear to use. It is designed with red and green dual color LED, which indicate the start and stop running of the equipment respectively; and a buzzer is added. After the curing work is completed, the buzzer will prompt the end of the curing work.

NOTE: Please make sure that the printed model has been washed in advance, or the secondary curing process will cause a pale surface on the finished model.

Specification:

Power Input: DC 12V

Power Adapter: Input: AC 100-240V，50~60Hz,Output:12V  

UV Lamp Wavelength: 405nm

Rotating Speed: 7r/min

Curing Size: Φ185mm×180mm

Product Size: 217(L)×204(W)×228(H)mm

Packing Size: 295(L)×270(W)×120(H)mm

Product Weight: ~1.3kg

Package Weight: ~1.72kg

Packing List:

1. Control Panel *1

2. User Manual *1

3. After-sell Service Card *1

4. Power Adapter *1

5. Screw *8 (Two different kinds)

6. Nut *6

7. Screwdriver *1

8. Lever *1

9. Rubber Band *20

10. Acrylic Board Unit *6