Solenoid valve with internal thread, 230 volts, size 1"
4509FU
Solenoid valve 1" suitable for drinking water
Scope of delivery/equipment:
- Solenoid valve with 1" internal thread
- Both sides with internal thread
- Suitable for drinking water
- For use with neutral, gaseous and liquid media (air/water)
- Closed when de-energized (open on request)
- The specified minimum pressure must always be present as differential pressure for proper functioning of the servo control
- Installation position: any
- Seal: NBR
- Media temperature: -10°C to +80°C
- With magnetic coil and device plug
- Voltage: 230 volts, 50 Hz
- Protection class: IP65
- 100% ED-VDE0580
- Fast closing
- Made in Germany
- Permissible pressure: 0.3 - 20 bar
With min. 0.3 bar pressure difference working - Please select the appropriate size under "Options"
Additional Information:
Valve in rest position closed (NC). When energized, the solenoid coil opens the pilot bore and the pressure on the upper side of the diaphragm is released. The now higher pressure under the diaphragm lifts it off the valve seat. The specified minimum pressure must always be present as a pressure difference.