BERNER - SKX1MD , SKX2MD , SKX3MD , SKX4MD . 433.92 MHz Kompatibel Handsender, Ersatz sender (Fixed code)

Great value, high quality 433.92 MHz Berner compatible clone remote control.

Small and compact design with the sliding cover. !

Fast cloning procedure. It clones within 10 seconds!! !

How to clone your remote, with an easy programming video: https://www.youtube.com/watch?v=U5bkC1-KqdU

Distance: extra long range.

This is top-quality 433.92Mhz Berner clone remote, which will clone your Berner 433.92MHz fixed code remote controls. Compatible with: Berner SKX 1 MD, SKX 2 MD, SKX 3 MD, SKX 4 MD, SKX1, SKX2, SKX3, SKX4, SKX1WD, SKX2WD, SKX3WD, SKX4WD, SKJ. With this remote cloner, you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with an easy programming videos: https://www.youtube.com/watch?v=cysYPSMgPXY or https://www.youtube.com/watch?v=oX4FNLXNXpQ. Follow these easy steps to program your remote; You need to erase the remote first: 1) Press and Hold button 1 and button 2 together - Led will flash 3 times 2) Keep holding button 1 and release button 2 3 times, LED will start Flashing Non-Stop. (it means, that remote is erased) . Next you need to clone your original remote: 1) Put both (ORIGINAL and CLONE) remotes Into "Back to Back Position ( II )" or "Side-by-Side". Make sure they have direct contact , touching each other. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until LED will make: 2 flashes - 3 flashes - Steady = Successfully cloned, only after the light goes into steady. If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. Note: you don't need an access to you control board or receiver!!! WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION !!