Product Description
Item specification
Rated power：960W
Cooling capacity：1000W-3000W
Refrigerant：R134A 600g （Not include in the package）
Oil：90ml-120ml POE68
Circulating air volume: 600m³/H
Range of Speed：1000-3000
Outdoor unit size：660*490*210 (mm)
Indoor unit size：495*355*190 (mm)
It is powered by the battery of the Truck car.
WHAT IS PARKING AIR CONDITIONER ?
The parking air conditioner is a kind of in-car air conditioner. It refers to the equipment that uses the on-board battery DC power supply (12V) to make the air conditioner run continuously when parking and waiting and resting, and to adjust and control the temperature, humidity, flow rate and other parameters of the ambient air in the car, so as to fully meet the comfort cooling needs of the truck driver.
Normally drivers leaving the engine running for hours to use the air conditioner during parking or rest time at night, it is bad for the environment and tons of fuel wasted, it also wears down the engine faster. Parking air conditioner works with truck battery power without engine on which can save energy and fuel and at same time provide safe and comfortable environment for driver. Fuel,Energy And Money Saving.
Digital frequency conversion control, more efficient and more energy saving. Use energy saving mode when you sleep at night, it can run continuously 6 to 8 hours. Use super mode in hottest hours, cooling rapidly and stronger air supply.
Installation
1.Remove the outer casing.
2.Select the installation position and mark the punch position. (Select 5 installation points)
3.Punch holes at the mark points. (Tool: an 8mm/0.3inch drill)
4.Use a pull riveter to fix the pull rivet nut at the marked hole.
5.Fixed the damping pad and sleeve at the marked points on the external 6.machine.
7.Fixed the external machine.
8.Install the internal machine: install an expansion valve.
9.Fixed internal machine mounting plate.
10.Fixed the internal machine.
11.3/8inch pipe (high-pressure pipe) connected to the condenser.
12.Connect internal and external machine wires and power cord.
13.Connect internal and external pipes, and fixed the evaporation box.
14.Connect internal and external wires.
15.Install the drainage pipe.
16.Vacuum for 15-20 minutes.
17.Refill refrigerant (Pure R134a) 400-450g/0.88-0.99lbs.
18.The power cord is connected to the battery.
19.Install the outer casing.
20.Winding tape to fix the internal and external machine connecting pipe and the internal and external machine connecting wire.
21.The installation is complete.
Package Included
1* Air Conditioner Kit (2 packages)
1* Remote Control
Other Accessories for Assembly