- ½ inch gauges are sized in 12.7mm – if you need either 12mm ½ inch or 13mm ½ inch please let me know

-1 inch is sized in 25mm not 25.4 – if you need 25.4 please let me know

Please note that these are hand finished so there may be slight defects such as but not limited to:

Support marks, machining marks, scratches and minor defects to the face and or back of plugs. No returns or exchanges on cosmetic issues.

Most plugs can be made in 10mm (00G) through 70mm; the smaller the size though the less detail you will see. Keep that in mind when purchasing.

These plugs come with a 2mm flare on them, if there is some resistance putting them in. You can try to either put them in while in a hot shower and/or using a type of oil.

Material:

The plugs are made of photopolymer resin; photopolymer resin is resin that is cured with a UV light in layers, then washed with isopropyl alcohol, then cured again under direct UV light. 

Not responsible for any skin reactions or ear reactions to the plugs; since these are an external wearable item. 

I have personally worn printed plugs daily for the last five years - following proper hygiene / cleaning of ears and plugs on a regular basis. With zero reactions / issues 

Production Time:

I have multiple printers so generally speaking its 1-day turnaround time but I always keep room for error and or busy times. At MOST the order will not take longer than a week unless I am out of resin and or do not have the necessary components to make a custom color.