Up for sale here is this rebuild kit for the Marantz 2216B (not the 2216). This includes all the parts you need to rebuild the Marantz 2216B P700 power supply/amplifier board, P400 phono EQ board, PE01/PH01 preamp board, and tuner board. This does not include new lights, fuses, or output transistors.  Lights I have available here.

This kit includes the following:

P700 Power Supply/Amplifier Board:
16 capacitors
2 mini adapter boards and 2 dual SMD transistors (to replace the 2SA798s)

P400 Phono EQ Board:
7 capacitors

PE01 Preamp Board:
9 capacitors
6 transistors

Tuner board:
27 capacitors
2 transistors

The kit for each board is bagged individually to make things easier.

These are all high-quality brand new genuine parts. The main capacitors are Nichicon VR 4700 uf 50v capacitors, the other capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, and Wima film caps at the same uf ratings and the same or higher voltage ratings, and the transistors and diodes are the correct Onsemi subs for the original transistors. These are extremely high-quality parts, and they are what I use when I rebuild Marantz equipment.

The 2SA798s on the P700 board don't always NEED to be replaced, but it's a good idea for longevity.  The kit includes a pair of tiny adapter boards and tiny SMD dual transistors to replace them.  You will need to assemble these, so you'll need either a very fine-point soldering iron tip and very thin solder, or you'll need SMD-working equipment.  Or you can skip that step.

I will include surprisingly well-written instructions, but this is moderately complicated, and you should know what you're doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with a 40W, 60W, or 100W incandescent bulb. Please see my pictures for details.

US shipping and handling is $6, and international is $20, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. If you have any questions, please ask.

Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use "add to cart" on everything you want and then check out for combined shipping.