eBay

Cometic Head Gasket 81mm .030 LSVTEC CRVTEC B18A1/B1 B20

Car Make: Acura Honda
Car Model: LSVTEC CRVTEC
Engine: B18A B18B + Vtec Head
Gasket Thickness: 0.030" / 0.76mm
Bore: 81mm
Material: Multi Layer Steel
Bore Size: STD

Provide maximum sealing performance for today`s high output engines and require no sealants
Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

Cometic MLS Gaskets are comprized of multiple layers of stainless steel due to it`s increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250°C /482ºF. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements.

Applications:
Honda / Acura B18A Hybrid Non VTEC Block w/ VTEC Head
Honda / Acura B18B Hybrid Non VTEC Block w/ VTEC Head
Honda / Acura B20 Hybrid Non VTEC Block w/ VTEC Head

Stock Code: C4237
Bore Size: 81mm

PLEASE NOTE:

Some listings use stock photos So Pictures may vary from actual parts.

PROFESSIONAL INSTALLATION IS STRONGLY RECOMMENDED

Please carefully check to make sure the part you are ordering will fit your application.

WE DO NOT ACCEPT RETURNS ON PARTS THAT HAVE BEEN INSTALLED UNLESS ITEM HAS A MANUFACTURER DEFECT.

Return & Refund Policy: We accept returns for replacement or refund. If you are not satisfied with your purchase and wish to make a return, please notify us within 30 days of receiving the item(s). All returned items must be in their original condition with original packaging.

Warranty Information: Any items that have a warranty issue will be handled by the manufacturer. Please contact us and we will supply you with the manufacturers contact information.