Set of genuine All Balls Racing heavy-duty steering tapered bearing & seal kit.

• Direct heavy-duty replacements for OEM tapered bearings.
• Upgrade heavy-duty replacements for older-style ball-bearing systems.
• Complete with both upper and lower taper bearing cups, cones and seals.
• Comes with everything pictured.

Important note from the manufacturer for this kit:

This kit (22-1011) contains 2 washers. One of the washers may be required in some applications. To determine whether and which washer is required, the total height of the original lower bearing stack must be measured. Take the 2 old bottom races (one from the lower frame and one from the lower triple tree) and place the balls into the races. Compare the total thickness (stack height) of the original bearing set to the total height of the taper bearing replacement set. If the thickness of the original bearing set is within +/- 1mm of the taper bearing replacement, discard the washers. If the thickness of the original bearing set is greater than 1mm, use the appropriate spacer washer to bring the total height of the taper bearing replacement set to within 1mm.

Please ensure your model and year are listed below for proper fitment.
This part will ONLY work on models and years listed above.

Refer to your repair manual for proper disassembly and assembly procedures.