Polymaker PolyLite NEON ABS 3D Printer Filament 1KG 1.75mm

PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. This filament specifically is NEON and reacts to UV blacklight giving a nice and bright neon color. Which 3D printer can print PolyLite™ ABS? Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber. In general a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will required an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+). Using proper bed adhesion can also help printing larger parts without deformation/warping issue.We can recommend BuildTak or one of West3D's build surfaces as adhesive and bed surface options. Printing and Drying Settings? Printing Temperature: 245˚C - 265˚CBed Temperature: 90˚C - 100˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 70˚C for 6h(Only if the material has absorbed moisture) Can PolyLite™ ABS be post-processed with Acetone? Yes, PolyLite™ ABS can be smoothed with acetone.WARNING: Acetone is a dangerous chemical, please handle it with the necessary safety precautions. We recommend PolySmooth™ as a safer alternative to create smooth surface models. Spool Dimensions? 1kg cardboard spool:Spool Inner Hole Diameter: 55±1mmSpool Diameter: 200±1mmSpool Width: 65.6±2mmSpool Weight: 140±7g