| Anzahl der analogen Eingänge | 4 |
| Anzahl der Kanäle insgesamt (Modul) | 4 |
| Signalart | Widerstandsmessung |
| Signalart konfigurierbar | ja |
| Sensoranschluss | 4 x (2 Leiter) |
| Datenbreite | 4 x 16 Bit Daten; 4 x 8 Bit Steuer/Status (optional) |
| Auflösung (über gesamten Bereich) | 0,1 °C |
| Messfehler 25 °C | ≤ 0,5 K im Temperaturbereich -30 °C … +150 °C |
| Temperaturkoeffizient | ≤ 20 ppm/K |
| Messstrom typ. | ≤ 350 µA |
| Messwiederholrate (Standard) | 1,1s |
| Messwiederholrate (2 Kanal/2 Leiter) | 0,63s |
| Ansprechverzug max. | 4s |
| Sensorarten | Pt1000; konfigurierbar: Ni1000, KTY 81 |
| Temperaturbereich | -30 … +150 °C |
| Konfigurationsmöglichkeiten | WAGO-I/O-CHECK CODESYS-Bibliothek e!COCKPIT |
| Versorgungsspannung System | DC 5 V; über Datenkontakte |
| Stromaufnahme Systemversorgung (5 V) | 50mA |
| Versorgungsspannung Feld | DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Potentialtrennung | 500 V System/Feld |
| Anzeigeelemente | LED (A, B, E, F) grün: Funktion AI 1 … AI 4; LED (C, D, G, H) rot: Fehler AI 1 … AI 4 |
| Anzahl Leistungskontakte eingehend | 2 |
| Anzahl Leistungskontakte ausgehend | 2 |
| Number of analog inputs | 4 |
| Total number of channels (module) | 4 |
| Signal type | Resistance measurement |
| Signal type (configurable) | yes |
| Sensor connection | 4 x (2-wire) |
| Data width | 4 x 16-bit data; 4 x 8-bit control/status (optional) |
| Resolution (over entire range) | 0.1 °C |
| Measurement error (25 °C) | ≤ 0.5 K in temperature range: −30 … +150 °C |
| Temperature coefficient | ≤ 20 ppm/K |
| Measuring current (typ.) | ≤ 350 µA |
| Measurement repetition rate (standard) | 1.1s |
| Measurement repetition rate (2-channel/2-conductor) | 0.63s |
| Response time (max.) | 4s |
| Sensor types | Pt1000; Configurable: Ni1000, KTY 81 |
| Temperature range | −30 … +150 °C |
| Configuration options | WAGO-I/O-CHECK CODESYS Library e!COCKPIT |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 50mA |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact) |
| Isolation | 500 V system/field |
| Indicators | LED (A, B, E, F) green: Function AI 1 … AI 4; LED (C, D, G, H) red: Error AI 1 … AI 4 |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |