Lighting Depot | Vintage HiFi LED Upgrades

3 x LED Dial Lamps for Marantz R-1262 R-1302 T-500

8V 29mm S6 fuse type dial lamp, ice blue. Complete set for one receiver.

LED lamps in the kit

runs on the original lamp supply

Ice Blue

LED colour

Fits

Marantz R-1262, Marantz R-1302, Marantz T-500

These are the 29mm fuse style dial lamps used behind the dial glass and meter windows on the Marantz R-1262 R-1302 T-500. They sit in the same spring clips as the original glass fuse lamp and run from the receiver's existing 8V lamp supply. Pull the old lamp out, push the LED in. Nothing to solder, nothing to modify.

Why swap to LED

✓	Even light across the whole dial, no dim lamp at one end and no yellowing hot spots
✓	A fraction of the current draw of a filament lamp, so the holders and dial plastics run cool
✓	Rated for tens of thousands of hours. Fit them once and forget them
✓	Three surface mounted LED chips on a rigid board, not a filament that fails with vibration

Specification

Lamp type	29mm fuse lamp LED
Base	S6 flat cap, 29mm fuse style (drops into the original spring clips)
Size	29mm long, 6.3mm diameter
Voltage	8V AC, as fitted to the original dial lamp circuit
Colour	Ice blue
LEDs per lamp	3 x surface mounted LED chips
Quantity	3 lamps, one complete set for the receiver

Before you order. Lamp fitments can vary between production runs of the same model. Check the size and base of the lamp you are replacing against the photos. Not sure? Message us the model and a photo of the old lamp and we will confirm the right kit.

What you get

3 x ice blue LED lamps, bench tested before dispatch, posted from the UK with tracking on request.

Also sold as: 8V fuse bulb, fuse lamp, festoon dial lamp, meter lamp, pilot lamp, T-2 fuse lamp, 29mm LED fuse.