Simply choose your width then length (total length including the head) then pack quantity from the menus available.

Material - Solid Aluminium
Type - Flat head
Sizes - All Metric (mm) Sizes

Free 1st class postage with same day dispatch Monday - Friday up till 2pm.

The setting of these fasteners requires access to both sides of a structure.
Solid rivets are driven using a hydraulically, pneumatically, or electromagnetically actuated squeezing tool or even a handheld hammer.
On installation, the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place.
In other words, pounding creates a new "head" on the other end by smashing the "tail" material flatter, resulting in a rivet that is roughly a dumbbell shape.
To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Because there is effectively a head on each end of an installed rivet, it can support tension loads. However, it is much more capable of supporting shear loads (loads perpendicular to the axis of the shaft).

A	B	C
M8	-	14mm
M6	-	10.5mm
M5	-	8.8mm
M4	-	7mm
M2	-	3.5mm
M3	-	5.2mm

Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.