Welcome European customers to our shop,we have this product in our Germany Warehouse now,so we will ship this product from Germany to you directly |
| |||||||||||||||||||||||||||||||||||||
Notice: These model we sold in Germany warehouse does not support RS232/RS485 communication functions!!! Please be informed before purchasing: The version we currently sell in our Germany warehouse is a simplified version with high cost-effectiveness, but it simplifies some functions such as RS232/RS485 communication port and negative voltage analog input. If you need the complete version, please contact us for customization!!! Package include: 400W (without brake) 1x A2M-60SV 01330 AC servo motor 1x S2-SVD15 AC servo driver 1x 3m power cable 1x3m encoder cable 600W (without brake) 1x A2M-60SV 01930 AC servo motor 1x S2-SVD15 AC servo driver 1x 3m power cable 1x3m encoder cable 750W (without brake) 1x A2M-80SV 02430 AC servo motor 1x S2-SVD15 AC servo driver 1x 3m power cable 1x3m encoder cable 1000W (without brake) 1x A2M-80SV 03230 AC servo motor 1x S2-SVD20 AC servo driver 1x 3m power cable 1x3m encoder cable 600W (with brake) 1x A2M-60SV 01930Z AC servo motor 1x S2-SVD15 AC servo driver 1x 3m power cable 1x3m encoder cable 750W (with brake) 1x A2M-80SV 02430Z AC servo motor 1x S2-SVD15 AC servo driver 1x 3m power cable 1x3m encoder cable Pls Note: English manual will be sent via email.
Product Description400W without brake 400W with brake |
|
|
|
|---|---|---|
Display Screen
| NoteWhen the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory. | Driver Parameters:
|
DEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)
NO.9 (DC12-24V), NO.10(COM) :
- Power supply and gound of inout/output control singal.
NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :
- Input command signal. Functions assigned to each input signal port at the factory.
NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :
- The command pulse can beinput in three different ways:
- Command direction and pulse input
- Clockwise/counterclockwise pulse input
- Quadrature pulse input with 90 degree phase difference.
NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :
- Contact the manufacturer for encoder output function.
NO.25 ( verf ), NO.13 ( AGND ) :
- Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V.
1000W without brake
Servo Motor Parameters:
- Model: A2M-80SV03230
- Power: 1000W
- Rated power supply: 220V
- With brake: No
- Number of poles: 5
- Rated torque: 3.8 N.m
- Instantaneous max torque: 11.4 N.m
- Rated speed: 2500rpm/min
- Max speed: 3000rpm/min
- Rated current: 1.8A±10%
- Instantaneous max current: 14.4±10%
- Moment coefficient ( Nm/A ): 0.93±10%
- Back EMF Coefficient ( X10V/rpm ): 56±10%
- Resistant( Ω ): : 3±10% ( 20℃ )
- Inductance: 19±20% mH ( 20℃ )
- Moment of inertia ( X10V/rpm ): 2.4±10%
- Max radial load: 392
- Max axial load: 147
- Ender resolution: 10000ppr
- Protection structure: IP65
- Insulation class: F
- Insulation Resistance: More than 20mΩ DC500V
- Insulation withstande voltage: AC 1500V 1 minutes
- Bibration level: Rated A for operation
- Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
- Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
- Inpact Strength: 98m/S²
- Vibration resistance: 49m/S²
- Rated voltage DC ( V ): 24±10%
- Rated power: 0.3
- Static torque: ≥ 4
- Insulation resistance: ＞500
- Resistance to high voltage: 1500V/1S/5mA
- Rotary clearance: ≤ 0.5
- Operating ambient temperature: -10 - +40
- Attract Time: ≤ 60
- Release Timeattract voltage: ≤ 20
- The release of the voltage: ≤19.2
- Running noise: ＞1.5
- Running noise: ＜60
1000W with brake
Servo Motor Parameters:
- Model: A2M-80SV03230Z
- Power: 1000W
- Rated power supply: 220V
- With brake: Yes
- Number of poles: 5
- Rated torque: 3.8 N.m
- Instantaneous max torque: 11.4 N.m
- Rated speed: 2500rpm/min
- Max speed: 3000rpm/min
- Rated current: 1.8A±10%
- Instantaneous max current: 14.4±10%
- Moment coefficient ( Nm/A ): 0.93±10%
- Back EMF Coefficient ( X10V/rpm ): 56±10%
- Resistant( Ω ): : 3±10% ( 20℃ )
- Inductance: 19±20% mH ( 20℃ )
- Moment of inertia ( X10V/rpm ): 2.4±10%
- Max radial load: 392
- Max axial load: 147
- Ender resolution: 10000ppr
- Protection structure: IP65
- Insulation class: F
- Insulation Resistance: More than 20mΩ DC500V
- Insulation withstande voltage: AC 1500V 1 minutes
- Bibration level: Rated A for operation
- Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
- Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
- Inpact Strength: 98m/S²
- Vibration resistance: 49m/S²
- Rated voltage DC ( V ): 24±10%
- Rated power: 0.3
- Static torque: ≥ 4
- Insulation resistance: ＞500
- Resistance to high voltage: 1500V/1S/5mA
- Rotary clearance: ≤ 0.5
- Operating ambient temperature: -10 - +40
- Attract Time: ≤ 60
- Release Timeattract voltage: ≤ 20
- The release of the voltage: ≤19.2
- Running noise: ＞1.5
- Running noise: ＜60
Wiring diagram of S2-SVD servo driver
CN1 port:
- Support RS-232 and RA-485 interfaces, adopts Modbus communication protocol, and can be connected to upper computer devices such as PC and PLC.
CN2 port:
- Upper computer singal cable. Can be connected to CNC system, programmable controller or other upper device.
CN3 port:
- Encoder cable. Connected to servo motor.
L1 / L2:
- Input power supply.
B+ / B1 / B2:
- Braking resistor terminal.
U / V / W:
- Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.
PE:
- Ground terminal of the driver.
|
|
|
|---|---|---|
Display Screen
| NoteWhen the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory. | Driver Parameters:
|
DEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)
NO.9 (DC12-24V), NO.10(COM) :
- Power supply and gound of inout/output control singal.
NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :
- Input command signal. Functions assigned to each input signal port at the factory.
NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :
- The command pulse can beinput in three different ways:
- Command direction and pulse input
- Clockwise/counterclockwise pulse input
- Quadrature pulse input with 90 degree phase difference.
NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :
- Contact the manufacturer for encoder output function.
NO.25 ( verf ), NO.13 ( AGND ) :
- Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V.
Application Areas
Suitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc.
Application:
Application areas: Industrial manipulator，Semiconductor equipment
Carving equipment，Measuring equipment，Medical equipment，robot and other
automated equipment on the market.Suitable for the following occasions
Repetitive
positioning control occasions; occasions with many input and output
points demand; networking communication applications.
Shipping
· Please open the package and check if there are some damages before sign, if there are some damages,please do not sign and contact us immediately
· We ship to worldwide but if your country’s custom is strict, please contact us before you bid to check detail and confirmed.
· Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.
Problem&Feedback
· Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
· If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.
· For any inquiries,issues or assistanceplease contact us via eBay message
Refund
· When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos to us.
· Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
· Please feel free for any questions, all the emails will be replied within 1-2 business days,if you didn’t receive any mail, maybe it’s in the junk mail fold.
· We are online from Monday to Saturday.
