The secret of a safe braking is also in the tablets
Brembo, world leader of the brakes, Integra its offer with a complete range of high performance pads, the result of avant -garde technology aimed at improving the safety of the entire braking system.
With a wide variety of mixes, from the left -handed to carbon -ceramic, and a very high number of product codes, Brembo meets the specific needs of all types of motorcycles - competition, road, city, off -road - and the expectations of all the drivers.
Mix
The mixes normally used in braking systems can be classified in two families, organic and sinter and the use of one type rather than the other is absolutely not linked to use: in fact there are brake pads of different types in the same users of users.
Sinterized materials: They are composed of metal dust, with additions of lubricants and abrasives that are agglomerated together through a process with high pressure and temperatures. The compound is fixed to the metal support of the desired form during the sintering process without adding any glue. Metal powders determine how much the tablet brakes and how stable it is at high temperatures; Lubricants contribute to the overall braking stability, abrasives keep the discs clean.
Organic materials: They are mainly composed of binding resins, metals, lubricants and abrasives. In this case, the friction coefficient is generated by metals and resins, while lubricants and abrasives carry out the work described above.
Choice of compound: The pads have their own scope. This depends on the different situations that a brake pad has to face: Racing - privileges the braking at high temperatures, road â - high stability, cold braking and medium temperatures. Brembo has an answer for every need.
Rodaggio: It is very important for all compounds and even fundamental for the RC compound. This operation is completed by carrying out a series of light braking and a subsequent braking leaving time between one and the other. Thus a correct thermal heating and cooling of the system is made. The running -in period depends on the type of compound: longer running in the organic compared to sinter.
The performance of the compounds, very different from each other, are described through the following parameters:
Efficiency (i.e. how much the core cutle): It is expressed through the medium friction coefficient and the stability of the friction to the main quantities that characterize the braking (speed, deceleration, temperature). It is detected through appropriate tests at the counter and on the vehicle.
Wear: It is expressed as the amount of worn friction material (in mm. thick or in volume) compared to the number of braking carried out (bench) or km. Routes (vehicle).
The functional differences between the various mixes can be summarized by observing the friction coefficient according to the operating temperature: the RC compound (organic racing, where 350 - 450 ° C. Of operating temperature can be considered normal conditions) has a very high hot friction coefficient, while the road mixes (as is the SA Sinterized road) are designed to work at the best of medium/bass temperatures, and precisely around 300 ° C. So the latter, if used on the track and therefore urged beyond measure, will be affected by the "Fading" effect and that is the degradation of the friction coefficient: in fact, beyond a certain temperature, they will tend to lose efficiency. On the contrary, using mixes racing on the road (and therefore with cold discs), the grip will not be so good and you can have the braking a little long. The intermediate compounds are naturally a compromise between these situations described, they will provide good performance in all conditions while not excelled with the two extreme garments of the range of operating temperature.
The secret of a safe braking is also in the tablets
Brembo, world leader of the brakes, Integra its offer with a complete range of high performance pads, the result of avant -garde technology aimed at improving the safety of the entire braking system.
With a wide variety of mixes, from the left -handed to carbon -ceramic, and a very high number of product codes, Brembo meets the specific needs of all types of motorcycles - competition, road, city, off -road - and the expectations of all the drivers.
Mix
The mixes normally used in braking systems can be classified in two families, organic and sinter and the use of one type rather than the other is absolutely not linked to use: in fact there are brake pads of different types in the same users of users.
Sinterized materials: They are composed of metal dust, with additions of lubricants and abrasives that are agglomerated together through a process with high pressure and temperatures. The compound is fixed to the metal support of the desired form during the sintering process without adding any glue. Metal powders determine how much the tablet brakes and how stable it is at high temperatures; Lubricants contribute to the overall braking stability, abrasives keep the discs clean.
Organic materials: They are mainly composed of binding resins, metals, lubricants and abrasives. In this case, the friction coefficient is generated by metals and resins, while lubricants and abrasives carry out the work described above.
Choice of compound: The pads have their own scope. This depends on the different situations that a brake pad has to face: Racing - privileges the braking at high temperatures, road â - high stability, cold braking and medium temperatures. Brembo has an answer for every need.
Rodaggio: It is very important for all compounds and even fundamental for the RC compound. This operation is completed by carrying out a series of light braking and a subsequent braking leaving time between one and the other. Thus a correct thermal heating and cooling of the system is made. The running -in period depends on the type of compound: longer running in the organic compared to sinter.
The performance of the compounds, very different from each other, are described through the following parameters:
Efficiency (i.e. how much the core cutle): It is expressed through the medium friction coefficient and the stability of the friction to the main quantities that characterize the braking (speed, deceleration, temperature). It is detected through appropriate tests at the counter and on the vehicle.
Wear: It is expressed as the amount of worn friction material (in mm. thick or in volume) compared to the number of braking carried out (bench) or km. Routes (vehicle).
The functional differences between the various mixes can be summarized by observing the friction coefficient according to the operating temperature: the RC compound (organic racing, where 350 - 450 ° C. Of operating temperature can be considered normal conditions) has a very high hot friction coefficient, while the road mixes (as is the SA Sinterized road) are designed to work at the best of medium/bass temperatures, and precisely around 300 ° C. So the latter, if used on the track and therefore urged beyond measure, will be affected by the "Fading" effect and that is the degradation of the friction coefficient: in fact, beyond a certain temperature, they will tend to lose efficiency. On the contrary, using mixes racing on the road (and therefore with cold discs), the grip will not be so good and you can have the braking a little long. The intermediate compounds are naturally a compromise between these situations described, they will provide good performance in all conditions while not excelled with the two extreme garments of the range of operating temperature.
It is communicated that customs charges for non -EU shipments are borne by the buyer
Purchased through the function BUY IT NOW,
But do not proceed with the payment.
Once all the objects are purchased
We will send a summary
Of purchases made with Only one cost
Shipments
Shipments relating to your orders will only be madeWith express courier GLS Executive
But do not proceed with the payment.
Once all the objects are purchased
We will send a summary
Of purchases made with Only one cost
The NCDM 2000 SAS has been a company on the market for over 40 years, specialized in the wholesale and retail trade of the best brands on the market in the world of 2 wheels.
Payment by credit card:
The customer must be the owner of the valid credit card at the time of the order of the products purchased online. At no time of the purchase procedure NCDM2000SAS is able to know the information relating to the customer's credit card, transmitted via protected connection directly to the site of the banking institution that manages the transaction. Payment by credit card takes place via the PayPal circuit.
Payment with PayPal:
If you choose to buy through the Paypal payment methods, at the end of the order, you will be addressed to the PayPal Login page. The order relating to the order is charged to the PayPal account at the time of the acquisition of the order. In case of cancellation of the order both by the Customer and in the event of non -acceptance of NCDM2000SAS, the amount will be refunded on the customer's PayPal account. The products will be shipped only after the credit will be displayed on our current account. The order will start at the time of the accreditation.
Purchases made on the NCDM2000SAS website are regulated by Italian law on correspondence sales. In the event that the Customer made the wrong order and received an article he did not want, he has 14 (fourteen) days from the delivery date to exercise the right of withdrawal, or the possibility of returning the product.
Pursuant to articles 64 and Segg. Dlt 206/2005, the consumer customer, that is, a natural person who acts for purposes unrelated to the entrepreneurial, commercial, artisan or professional activity possibly carried out, has the right to withdraw from the purchase contract for any reason and consequently has the right to return the purchased asset and to obtain reimbursement of the expenditure incurred, in compliance with the methods indicated below.
The right of withdrawal is subject to the following conditions:
- the right applies to the product in its entirety and not on parts or components of it;
To exercise the right of withdrawal, the Customer, without the need to provide explanations and without any penalty, must send within the deadline of 14 (fourteen) days from the day of receipt of the property, a communication in which the desire to withdraw from the contract is indicated .. The good must be returned intact and carefully packed in the original packaging, complete with any accessory.
NCDM2000SAS does not respond in any way for damage or theft/loss of goods returned with unposested shipments.
If you wish you can indicate fraction/locality/other separate.
It is important that he reports a telephone contact for the courier.
The NCDM 2000 SAS has been a company on the market for over 40 years, specialized in the wholesale and retail trade of the best brands on the market in the world of 2 wheels.
Payment by credit card:
The customer must be the owner of the valid credit card at the time of the order of the products purchased online. At no time of the purchase procedure NCDM2000SAS is able to know the information relating to the customer's credit card, transmitted via protected connection directly to the site of the banking institution that manages the transaction. Payment by credit card takes place via the PayPal circuit.
Payment with PayPal:
If you choose to buy through the Paypal payment methods, at the end of the order, you will be addressed to the PayPal Login page. The order relating to the order is charged to the PayPal account at the time of the acquisition of the order. In case of cancellation of the order both by the Customer and in the event of non -acceptance of NCDM2000SAS, the amount will be refunded on the customer's PayPal account. The products will be shipped only after the credit will be displayed on our current account. The order will start at the time of the accreditation.
Purchases made on the NCDM2000SAS website are regulated by Italian law on correspondence sales. In the event that the Customer made the wrong order and received an article he did not want, he has 14 (fourteen) days from the delivery date to exercise the right of withdrawal, or the possibility of returning the product.
Pursuant to articles 64 and Segg. Dlt 206/2005, the consumer customer, that is, a natural person who acts for purposes unrelated to the entrepreneurial, commercial, artisan or professional activity possibly carried out, has the right to withdraw from the purchase contract for any reason and consequently has the right to return the purchased asset and to obtain reimbursement of the expenditure incurred, in compliance with the methods indicated below.
The right of withdrawal is subject to the following conditions:
- the right applies to the product in its entirety and not on parts or components of it;
To exercise the right of withdrawal, the Customer, without the need to provide explanations and without any penalty, must send within the deadline of 14 (fourteen) days from the day of receipt of the property, a communication in which the desire to withdraw from the contract is indicated .. The good must be returned intact and carefully packed in the original packaging, complete with any accessory.
NCDM2000SAS does not respond in any way for damage or theft/loss of goods returned with unposested shipments.
If you wish you can indicate fraction/locality/other separate.
It is important that he reports a telephone contact for the courier.
