Why do you need a Wheel Alignment Tool?
| ||
| Easy to Use: 1. Check with a four-wheel aligner to determine whether the camber angle needs to be adjusted; 2. Remove the four-wheel aligner sensor (clamp) and tire; 3. Suck the magnetic level on the brake disc and center the horizontal bubble of the level; 4. Press the""on I off"" switch of the level gauge to start up. After the interface number is stable, press ""zero"" to return to zero;(the interface displays the numbers ""0.0"" and ""zero"" at the same time) 5. Replace the upper bolt of the original shock absorber with the upper eccentric bolt; 6. Adjust the eccentric screw to make the level reach the expected value, and lock the eccentric nut with a torque wrench;(the ""inside arrow"" arrow faces the inside, which means it is adjusted down; the arrow goes beyond the outside, which means it is adjusted up) 7. Install the tire and fixture (sensor), remeasure with the locator and correct other angle data. | ||
![]() | ![]() | ![]() |
Data Record After setting the reference to zero, the last reference value is still maintained when the power is turned on or off. | Super Magnetic Base Attaches firmly to the metal surface. Super suction power to ensure that it won't fall off during the adjustment process. | Battery-Powered Mode This car camber tool is powered by two AAA batteries.The battery is not included, you need to buy it separately. |
![]() | ||
| Camber gauge is suitable for camber alignment and maintenance on all vehicles, and can also be used for rear wheel tie rod replacement measurements. Please make sure the vehicle is level when measuring, so as not to affect the correct value. | ||
![]() | ||
Specifications:
Packing List:
Note: This product does not contain batteries, and the applicable battery type is AAA batteries. | ||

