![]() The V50 Injector Tester is powered by a 12V automotive battery with diagnostic and cleaning functions and can be used in conjunction with motor vehicle injector testers and cleaning fluid flushes. By manually setting the pulse frequency, it is possible to achieve the effect of cleaning the injectors and testing the amount of fuel injected by the injectors. ![]() For all types of injectors It can control a wide range of gasoline and diesel injectors, including high-pressure injectors PFI/FSI/TFSI/GDI/Peizo and all common types of injectors. ![]() Can be used in combination The kit also provides a universal adapter for most direct injection injectors that can be mounted on the fuel rail of most conventional PFI injector testers to test injector injectability, complete injector cleaning and other equipment testing by sending a pulse signal to the injector |
| ![]() |
| Automatic detection of fuel injector type The Injector Tester has the function of automatically recognizing the type of injector, when you connect the injector, just touch the button, without any complicated settings. | 5 Pulse Frequencies The Injector Tester has 5 adjustable pulse frequencies to make it easy to perform tasks such as cleaning injectors and testing injectors. |
| Adapters: There are 6 pcs of adapters for fitting different injectors to a fuel rail of a traditional PFI gasoline injector tester. |
| Φ6 to G1/4: Fitting for the fuel introduction port of Bosch Peizo injector, For example, fit for certain Mecedes-Benz injectors |
| Φ11.5 with O-ring to G1/4: For round injectors, fit for use on BMW B38/48. |
| Φ11.5 to G1/4: Fitting fit for VW or other injectors with O-ring. |
| M12x1.5 to G1/4: Accessories for fuel injectors M12 Fuel Intro Port fit for BMW or other |
| G1/4 to M12x1.75; For convert G1/4 thread to M12x1.75, which was the standard of fuel rail of PFI injector tester made by some other manufacturers. |
| Φ16 to Φ8.5; Fitting for smaller type of injectors which might not be big enough to fit into the rack on the top of the injector tester |
![]() | ![]() |
| Technical data: Power supply: DC 12V Current: 1Amp Operating temperature: -20~60°C Humidity: <85% | Scope of delivery: 1 x driver box 1 x DC adapter 1 x power cable 1 x signal output cable 6 x connection adapter 1 x extension cable |
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days.

