Untitled Document

Actual product may differ from photo*

STAGE 5 (2MS)

200% INCREASED HOLDING CAPACITY

RACE APPLICATIONS / HEAVY TRACK USE
(HEAVY-DUTY STREET USE DRAG / ROAD / DRIFT RACING)

The 2MS Stage 5 Kit uses an extremely durable, High Performance MIBA Sprung Ceramic Disc. This kit features a dual clamp load heavy-duty pressure plate with reinforced drive straps for increased durability. Action Clutch's dual clamp load kit offers nearly double the clamping force of their stage 3 and 4 kits which increases the TQ capacity. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic kit is engineered for low/mild horsepower vehicles. The Stage 5 MIBA Sprung Ceramic kit creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of their sprung kits, the Stage 5 kit features fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each kit is assembled, it goes through multiple quality checks before it is signed off by one of their lead engineers (50+ years combined experience).


Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque.

Pressure Plate Features

  • Ductile Iron Friction plate
  • Dual Clamp Load HD Pressure Plate
  • Reinforced heavy duty drive straps
  • 4 stage Heat treated diaphragm spring
  • American grade rivets
  • 100% dynamically spin balanced

Clutch Disc Features

  • MIBA Ceramic Sprung 6 Puck Clutch Disc
  • Patented, Fully Enclosed, Spring Retainers
  • Sprung Hub For Easy Engagement
  • American Grade Rivets
 
 
 
SFI SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.



 

ITEM DESCRIPTION

  • Clutch Size: (9-7/16" x 1-1/8" x 10 spline)
  • Torque Capacity: 454 lb-ft
  • HP Rating: 504 HP
  • Lightened Flywheel: (45% lighter than heavy factory dual mass flywheel)

What's included

  • Lightened Flywheel
  • Dual Clamp Load HD Pressure Plate
  • MIBA Ceramic Sprung 6 Puck Clutch Disc
  • Premium Throwout Bearing
  • Premium Pilot Bearing
  • Clutch Alignment Tool

FITMENT

  • Fits 1999 - 2000 BMW 528i (E39, 2.8L 6cyl)
  • Fits 2001 - 2003 BMW 530i (E39, 3.0L 6cyl)
  • Fits 1999 - 2002 BMW Z3 (E36, 2.5L 6cyl)
  • Fits 2001 - 2003 BMW 525i (E39, 2.5L 6cyl)
  • Fits 2003 - 10/2003 BMW Z4 (E85, E86, 2.5 6cyl)​​​​​​​
  • Fits 1999 - 2000 BMW 323i (E46, 2.5L 6cyl; Fits 4 door only)
  • Fits 2000 - 2000 BMW 323Ci (E46, 2.5L 6cyl; Fits 2 door only)
  • Fits 2001 - 09/2003 BMW 325i (E46, 2.5L 6cyl; Fits 4 door only)
  • Fits 2001 - 09/2003 BMW 325Ci (E46, 2.5L 6cyl; Fits 2 door only)
  • Fits 1999 - 2000 BMW 328i (E46, 2.8L 6cyl; Fits 4 door only)
  • Fits 2000 - 2000 BMW 328Ci (E46, 2.8L 6cyl; Fits 2 door only)
  • Fits 2001 - 3/2003 BMW 330i (E46, 3.0L 6cyl; 4 door model, 2 door model; Fits 5 speed only)
  • Fits 2001 - 3/2003 BMW 330Xi (E46, 3.0L 6cyl; Fits 5 speed only)
Note: Both the clutch and flywheel should be employed as a unit, with no reuse of any pre-existing components.

SHIPPING

All packages are sent via USPS or UPS

However, once the package gets picked up from our location, we have NO control over how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.

INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay. Express shipping is available upon request

RETURNS

We offer a 30 Day Return Policy, Buyer pays for return shipping.

WARRANTY

Action Clutch warrants this product against defects in material or workmanship as follows:

Action Clutch will replace at no charge for parts only that proves defective because of improper workmanship. If Action Clutch is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, Action Clutch may elect to refund the purchase price in exchange for the return of the product.

Action Clutch offers a 90-day warranty from the original date of purchase. Action Clutch also offers a 30-day return policy with a 20% restocking fee.

Action Clutches warranty does not cover any problem that is caused by:

(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by Action Clutch. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.