Untitled Document

Actual product may differ from photo*

STAGE 1 (1OS)

70% INCREASED HOLDING CAPACITY

STREET/TRACK APPLICATIONS
(OCCASIONAL TRACK USE – CIRCUIT / TIME ATTACK / ROAD RACING)

Action Clutch Stage 1 (1OS) Kits have been designed for vehicles ranging from stock to basic bolt-on cars. It utilizes a reinforced Steel Backed Copper Kevlar Organic friction material, coupled with a single diaphragm heavy-duty pressure plate to give you smooth and reliable engagement without sacrificing the OEM-like pedal feel.

At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.


Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque.

Pressure Plate Features

  • Ductile Iron Friction plate
  • Single Diaphragm HD Pressure Plate
  • Reinforced heavy duty drive straps
  • 4 stage Heat treated diaphragm spring
  • American grade rivets
  • 100% dynamically spin balanced

Clutch Disc Features

  • Steel-Backed Full Face Copper Kevlar® Organic Friction Material
  • Patented, Fully Enclosed, Spring Retainers
  • Sprung Hub For Easy Engagement
  • American Grade Rivets
 
 
 
SFI SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.



 

ITEM DESCRIPTION

  • Clutch Size: (9" x 7/8" x 28 spline)
  • Torque Capacity: 275 lb-ft
  • HP Rating: 300 HP
  • Lightened Flywheel: (10.82 lbs)

What's included

  • Lightened Flywheel
  • Single Diaphragm HD Pressure Plate
  • Full Face Sprung Organic Clutch Disc
  • Premium Throwout Bearing
  • Premium Pilot Bearing
  • Clutch Alignment Tool

FITMENT

  • Fits 2000 - 2005 Volkswagen Jetta (1.8L Turbo; fits 5-speed only)
  • Fits 1999 - 2005 Volkswagen Jetta (1.9L Turbo Diesel)
  • Fits 1999 - 2006 Volkswagen Golf TDI (1.9L Turbo Diesel)
  • Fits 2000 - 2006 Volkswagen Golf (1.8L Turbo; fits 5-speed only)
  • Fits 1998 - 2005 Volkswagen Beetle TDI (1.9L Turbo Diesel)
  • Fits 1999 - 2004 Volkswagen Beetle (1.8L Turbo; fits 5-speed only, Does Not Fit Turbo S)
  • Fits 2000 - 2006 Audi TT (1.8L Turbo; fits FWD model only. Does Not Fit Quattro)
  • Fits 1998 - 2003 Audi A3 (1.8L Turbo; fits 5-speed only)
Note: Install a robust pressure plate and solid chromoly flywheel to upgrade performance, enhance load capacity, and extend lifespan, replacing the original factory clutch and dual mass flywheel unit.

SHIPPING

All packages are sent via USPS or UPS

However, once the package gets picked up from our location, we have NO control over how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.

INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay. Express shipping is available upon request

RETURNS

We offer a 30 Day Return Policy, Buyer pays for return shipping.

WARRANTY

Action Clutch warrants this product against defects in material or workmanship as follows:

Action Clutch will replace at no charge for parts only that proves defective because of improper workmanship. If Action Clutch is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, Action Clutch may elect to refund the purchase price in exchange for the return of the product.

Action Clutch offers a 90-day warranty from the original date of purchase. Action Clutch also offers a 30-day return policy with a 20% restocking fee.

Action Clutches warranty does not cover any problem that is caused by:

(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by Action Clutch. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.