eBay

QIACHIP Wireless RF Relay Switch, 2-Channel 433MHz Momentary/Toggle

【Long Range】Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m/164ft in open space.
❤ Note:①When the remote control distance can’t meet the requirements, pls replace the battery;
②The remote control distance will be affected by the use environment. Do not place the receiver or remote control in a metal case or near a metal object
【Wide Application】Application Range: 12V DC motor / 24V DC motor / water pump / energy-saving lamp / LED lamp / fluorescent lamp / telescopic door modification / electric control lock / access control system / automotive tail plate modification / electric curtain modification, etc. Safe and reliab.
【4CH for More Control 】Adjustable working way, switch Momentary / Toggle / Latched. All remote control switch kits support 433mhz frequency. Learning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
【Easy to Install 】Extremely easy to setup, learn, relearn and control(please refer to details). 2 independent relay channels can either work together (In Toggle) for polarity forward and reverse or individually (Momentary / Latched) to control different electronics.
【Package Includes 】Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, Mounting holes are provided for easy installation to walls etc using screws.Comes with 2pcs 4 Button Transmitters and 1pcs 2CH Receiver.
❤ NOTE: Please email us if you meet any problem, we are always here to help, thanks!

Product Description

Working mode:1.Momentary mode 2.Toggle mode3. Latching mode

DC 12V 2 Channel Remote Control Switch

Latching: applied to rolling doors, telescopic doors, etc., can be used with a 3-key remote control, using the latching mode, 1 key controls forward rotation, another key controls reverse rotation, and the other key no need to be pairing code, press it to pause the device. The same goes for the remote control with 4 keys. The other 2 keys no need to be pairing code, press any of the keys will stop the device from working.

DC 12V 4 Channel Remote Control Switch

Toggle:One remote control button controls one relay.

The load end can be connected to 4 lamps or two motors.

A total of 7 working modes:

Momentary Mode

Toggle Mode

Latched Mode

2CH Momentary + 2CH Toggle

2CH Momentary + 2CH Latched

2CH Toggle + 2CH Latched

2CH Latched + 2CH Latched

AC 85~220V 2 Channel Remote Control Switch

Momentary: If work with a 2-button remote control, use the momentary mode, generally used to control switch, 2 channels can control 2 switches, but this situation is rare; It can also be used for motor equipment, rolling doors, curtains, etc. With a 2-button remote control, one button controls the forward rotation of the motor, and one button controls the reverse rotation of the motor. Release the remote control button and the device will stop.

DC 6V~30V 2 Channel Remote Control Switch

Product Model Description(1202 2202 2402)

2CH Momentary Mode:

Step 1, press the button on the receiver board once

Step 2, press the A button, then the light of the receiver board will flash.

Step 3, Wait for the blinking to finish, then press another button B. The receiver board will blink again.

After pairing is complete, long press A button to control forward rotation and long press B button to control reverse rotation.

2CH Toggle mode:

Step 1, press the button on the receiver board twice.

Step 2, press the A button, then the light on the receiver board will blink.

Step 3, wait for the blinking to end, then press the B button once more, and the receiver board will blink again.

After the pairing is finished, short press the A button to control forward rotation and short press the B button to control reverse rotation. Short press the A/B button again, the motor will stop forward/reverse rotation.

2CH Latched mode:

Step 1, press the button on the receiver board three times.

Step 2, press the A button, then the light on the receiver board will blink.

Step 3, wait for the blinking to end, then press the B button once more, and the receiver board will blink again.

After the pairing is finished, short press A button to control forward rotation and short press B button to control reverse rotation. Press A+B button together, the motor stops rotating. You can also use other individual buttons to stop the rotation (except for the paired A and B buttons)

KR1202 + 2KT09(DC 12V 2-CH Remote Control Switch)

KR1204+2KT06(DC 12V 4-CH Remote Control Switch)

KR2202+4KT05(AC 85~220V 2-CH Remote Control Switch)

KR2402A+2KT06(DC 6V~30V 2-CH Remote Control Switch)

Maximum Switching Current	5 Milliamps
Style	KR2402
Color	KR2402A+2KT06(DC 6~30V 2-CH)
Coil Voltage	24 Volts
Country of Origin	China
Battery Cell Type	Lithium Manganese Dioxide
Item Weight	4.2 ounces
Batteries	2 CR2032 batteries required.
Batteries Included?	No
Measurement System	Metric, Imperial
Batteries Required?	No
Color Name	KR2402A+2KT06(DC 6~30V 2-CH)
Package Dimensions	5.87 x 4.49 x 1.34 inches

Shipping

Fast shipping is very important for us. We use multiple fulfilment warehouse around the United States.

We only ship to the lower 48 States and do not ship to PO Boxes.

Our standard US shipping service is $6.99 per order.

Your order will be shipped within 2-3 business days upon full payment received.

Your order will be delivered within 1-5 business days after the handling time.

We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses.

Returns

We offer a 30 days return policy from checkout date.

FeedBack

Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback

If you have any problem with your order / any questions please before leave any type of feedback

For any questions, using eBay contact system