Selected colors for Industrial Sewing Machine Table Repair.
Please select available colors from menu.
• SeamFil is a single part, solvent based repair system for high pressure
laminated surfaces. It will cure in approximately one hour, but we
recommend 24 hours for total cure. SF99 Solvent is the ONLY
recommended solvent for use with SeamFil.
• One (one ounce tube of SeamFil) will approximately fill an 8 foot Seam
of Counter with an 1/8" bead. If the seam is wider than 1/16" (but
should never be larger than 1/8") a second application will probably be
necessary. It can be used to fill an area that is no larger than 1/4" in
diameter.
• SeamFil will not freeze because it is solvent-based .
• SeamFil can withstand heat up to 120 F
• SeamFil’s VOC is 24.1 (31.20 g / l , 2.60 lbs./gal) wet measurement
and SF99 Solvent is 100% VOC and will attack non-laminate surfaces
like, finished wood, PVC, etc.
• SeamFil dries to a matte finish. To obtain a Glossy Finish,
943 Clear Gloss should be added.
• To increase the cure time of SeamFil, 944 SeamFil Retarder can be
added to the mix.
• SeamFil is a one-part system that is a solid color. It does not have any
variation of color within the tube for patterns or woodgrain effects.
• SeamFil is NOT recommended for use on Solid Surface materials. Our
ColorFlex product is used for Solid Surfaces.